Installation of curtain box-The construction specification and classification of curtain box are different according to the different treatment methods at the top. There are two ways for curtain boxes. One is that the room has a decorated ceiling, and the curtain box should be hidden in the decorated ceiling, and it should be done together with the top decoration ceiling. The other is that the room has an undecorated ceiling, and the curtain box is fixed on the wall and integrated with the window frame cover. The curtain box structure is very simple, and the engineering construction is relatively easy.
The specifications and models of curtain box are about 100 mm high, and the width is determined according to the total number of Roman rods used. The width of a single curtain box rod is 120 mm, and the width of parallel bars is greater than 150 mm. According to the design scheme, the minimum length should exceed the width of the dialog box by 300 mm, and both sides of the dialog box should be greater than150 mm, which can be as long as the wall at most. The curtain box is made of blockboard and connected with trumpet-shaped plum blossom glue. If the decorative plate is coated with vegetable oil, it should be pasted with a wooden decorative plate made of the same material as the window frame, and the pasting surface is the outer edge and bottom edge of the curtain box.
Curtain boxes that run through the whole line can be fixed on both sides and the top surface of the wall immediately. Curtain fabrics that do not run through the whole line should be supported by brackets, generally using iron support frames. The iron support frame has been embedded in the construction process, and can also be fixed on the wall and top surface immediately. When fixing, open a hole at the positioning point, put a plastic expansion pin and fix it with a small screw. In order to ensure that the curtain box is installed smoothly, both sides are the same length away from the window, and the lines should be laid before installation. After the curtain box is installed, the finishing work of the decorative board will be carried out to solve the maintenance problem after the curtain box is installed and avoid environmental pollution and damage.
Installation of curtain box-curtain box 1 installation process and common problems. Positioning and marking: When installing the curtain box and Roman rod, the center should be positioned according to the design drawings, the horizontal line should be played well, and the structural connection should be found well.
2. Inspection and treatment of embedded parts: After line finding, check whether the position, specifications and methods of the embedded parts of the fixed curtain box (rod) can meet the requirements of fixed installation, and take certain effective measures to deal with the deviation of design elevation, pingdu city, center position and distance from the wall.
3. Check the processed products: check the processed products that have entered the market. Before installation, check whether the model, specification and assembly structure meet the design scheme and installation requirements.
4. Installation of curtain box (pole): Please ask professionals to cooperate to install curtain box on the width and length of curtain cloth.
5. Frequently asked questions: The primary reason for the looseness of curtain box is the looseness of rod eye or the weak connection with base material. If the rod hole connection is too loose, remove the curtain box, repair the rod hole and reinstall it. If the connection with the base material is not firm, further tighten the small screw or raise the support point. The primary factor of curtain box skew is that there is no elastic thread when installing, which makes the difference between the two sides and the installation difference at the edge exceed the allowable error. The curtain box should be removed as required, and re-installed after elastic thread.
Although the curtain box is a decorative design product of small objects, it still needs careful internal decoration, otherwise it will be more troublesome to recover from problems in the middle and late stages. At this time, reliable decoration workers should be invited to help install interior decoration. At the same time, even such a small object needs to match the color and style of curtain cloth, and it is not allowed to make all curtain cloth interior decoration look stiff and weird, so it is necessary to choose the installation carefully.