Step 1: Find a piece of cardboard.

Step 2: Cut out 12 trapezoids with the same size. It is for the main body of the lantern.

Step 3:

Make two hexagons as the bottom and top of the lantern.

This hexagon is more complicated to make. Let's explain it in a few small steps:

1, first draw a straight line on the cardboard, and determine a center point on the straight line.

2. Use a protractor to find the point between 60 degrees and 120 degrees.

3, connection, the prototype of the hexagon came out.

4. Take the size of the short side of the trapezoid made in the first step as the side length of the hexagon.

Ok, 12 trapezoid and 2 hexagon are finished.

Step 4:

Hollow out the upper 12 trapezoid and two hexagons. Please note that one of the hexagons is the bottom, so leave room for candles.

Step five:

Stick cellophane on the hollowed-out part of the lamp body. No cellophane was found, so this step is lazy.

Step 6:

Glue every two long sides of the trapezoid together.

Step 7: Glue the short side of the trapezoid and the hexagonal side together (as the bottom of the lantern).

Step 8:

The hexagonal rope used as the top of the lantern is also glued to the trapezoid. Okay, it's over.