1, wall-mounted installation mode
? 1) This installation method is usually used indoors or semi-outdoors. 2) The display area of the screen body is small, and there is generally no room for maintenance channels, so the whole screen is taken down for maintenance or made into a folding integrated frame. 3) The screen area is slightly larger, and the front maintenance design is generally adopted (that is, the front maintenance design usually adopts the column assembly method).
2, column installation mode
? There are many vertical installation methods, which are generally used for outdoor advertising, as follows: 1) Single vertical installation method: suitable for small screen applications; 2) Double column installation mode: suitable for large screen application; 3) Closed maintenance passage: suitable for simple boxes; 4) Open maintenance channel: suitable for standard containers.
3. Cantilever installation mode
? 1) This method is mostly used indoors and semi-outdoors; 2) It is generally used at the entrance of passages and corridors, and can also be used at the entrance of stations, railway stations and subway stations. 3) Used for traffic guidance of expressways, railways and expressways; 4) The overall cabinet design or hoisting structure design is generally adopted for the screen design.
4. Hanging installation method
? This installation method is similar to cantilever installation method, and the application is the same. The screen body adopts the design scheme of integrated cabinet, which is suitable for indoor and semi-outdoor screens.
5. Mosaic installation mode
? 1) The whole display screen is embedded in the wall, and the display plane is at the same level as the wall; 2) Simple box design is adopted; 3) Pre-maintenance (pre-maintenance design) is generally adopted; 4) This installation method is available indoors and outdoors, but it is generally used for screens with small point distance and small display area; 5) Generally used at the entrance of a building, the lobby of a building, etc.
6. Vertical installation mode
? 1) generally adopts integral cabinet design, but also has discrete combination design; 2) Suitable for indoor small-point-distance screen bodies; 3) Generally, the display area is small; 4) The main typical application is LED TV design.
7. Roof installation method
? 1) The wind resistance of this installation method is the key; 2) Generally installed at an inclined angle, or the module is designed at an inclined angle of 8; 3) Mostly used for outdoor advertising display.
8. Installation method of football field fence
? The viewing angle of the advertising display screen used for the fence around the football field can be adjusted by adjusting the inclination of the supporting frame. Adopt soft silicone mask design and soft arc top design to avoid sports collision injury.
9. Lease hoisting method
? The size of the screen is determined by the ordinary screen. The lifting screen should not be too large. The general requirement is less than 6M* 10M. Exceptions for special box materials and curtain types. The top is equipped with hanging beam and the bottom is equipped with bottom beam. The hanging beam is used to hang the screen. The row and the box are connected by a lifting mechanism, and the horizontal box is fastened by a lock button. The hoisting mechanism is divided into gear type, cone rod type and bolt type. The gear type is more expensive and more beautiful, and the taper type is moderate and more reliable. Bolt type is the cheapest, most reliable and troublesome to assemble, so it can be applied without repeated disassembly.
10, arc installation mode
? Picture length x width (height): LxW；; Picture length w: refers to the height of the picture; Picture length l: the length of the picture. According to the circumference of a circle or arc, the length of a painting can be preliminarily determined. Divide by the module length to determine the number of modules. For the circular screen, try to divide it into 92 modules; Try to determine the number of modules in a row according to integer multiples of 2, 3, 4, 5 and 6 (convenient for packing and production). The draft angle of a module is generally 2 degrees, and a module is only 4 degrees. That is, it usually takes 92 modules to form a perfect circular screen. At least no less than 60 modules. After determining the number of modules in a row, you can get the length of the screen. Picture length L= number of modules * module length; Picture area a = l * w；; For a non-circular screen (curved screen), you only need to divide it as needed, just like cutting a cake. The mounting frame needs to be customized according to the size of the circular screen (arc screen).
1 1. Truss mobile installation method
? 1) The screen body can move in real time according to actual needs; 2) The screen body moves and closes according to the display screen and site conditions; 3) Using truss guide rail design; 4) It is generally used in the background screen of the stage, and is mostly used in TV stations, concerts and other scenes.