When installing lights inside lanterns, it is still very simple. First of all, the outer packaging of lanterns must be removed, and at the same time, all their upper and lower bases should be installed. After the lantern is completely installed outside, when installing the lamps inside, you need to pull the wires yourself, buy the lamp holder and light bulb and put them all into the lantern.

The method is relatively simple. If you can't operate it yourself, you can also find a special staff to help you operate it. At present, most lanterns bought at home are rechargeable and can be turned on and off automatically.

How to put a light bulb in a lantern?

1. Install the lamp holder and the 40-watt incandescent lamp. The lower plate of the lamp holder is flat and there are two holes on the upper side for fixing. There should be a tow in the center of the lower end of the lantern, and the base of the lamp mouth should be combined with this tow. The simple method is to tie and fix it with iron wire through two holes.

2. In addition, wire the lamp holder in advance. The wire is led out from the hole in the upper part of the lantern, tied with the hanging rope for hanging the lantern, and one end is equipped with a two-phase plug. After the lantern is hung, plug it into the power socket and it will light up.