1. What are the quality requirements for exterior wall real stone paint?
Uniform color requirements, no large area color difference and obvious connection; Problems such as pan-alkali and color biting are not allowed; The density of real stone paint spraying construction requires uniform thickness, and the surface after construction is smooth, without sagging and unevenness.
Second, what occasion is the real stone paint spraying suitable for?
1, Roman cylinder spraying
Rome cylinder is sprayed by M-line construction method, which is suitable for spraying cylindrical building surfaces. When spraying, it is necessary to spray vertically from top to bottom at a distance of 40cm from the cylinder, spray one side and then turn to the other side, and control the turning angle at 60 degrees each time.
2, square column spraying
Square columns can also be sprayed with real stone paint, because the appearance of columns is angular, so uneven spraying is easy to occur. In order to avoid the problem of fuzzy edges and corners, it is necessary to control the spraying distance to 50cm and spray it from a long distance, so that the fog will spread wider, the spraying area will be larger, and at the same time it will be more uniform and show angular lines.
3. Vertical spraying
If real stone paint is sprayed on the vertical surface, it can be constructed by drawing a circle. The spray gun should be 30cm-40cm away from the construction surface, and the circle drawing radius should be controlled at 15cm. During construction, it is necessary to shake the spray gun up and down from time to time.
Editor's summary: The above is an introduction about the quality requirements of exterior wall real stone paint and the occasions suitable for spraying real stone paint. I hope what Bian Xiao shared can be a reference for everyone. If you want to know more, you can pay attention to our family. Com information.