Current location - Plastic Surgery and Aesthetics Network - Wedding planning company - How to solve Haier washing machine e 1?
How to solve Haier washing machine e 1?
The solution of Haier washing machine E 1 is as follows: abnormal water inflow, lower than the set water level, control circuit.

1, the digital tube of washing machine shows fault code E 1, accompanied by flute, which belongs to abnormal water inflow. The washing machine can feed water, which is estimated to be caused by too low water pressure and too long drainage time, indicating that there is no problem with the washing machine and it does not need maintenance. It can be used at other times.

2. This phenomenon occurs when the water level of the washing machine fails to reach 1 water level within 10 minutes and the set water level within 20 minutes. If the water level sensor or drain valve controller fails, the water level sensor will be fine after it is broken.

3. Press the dehydration function alone, and the traction motor of the washing machine will pull the clutch. If there is a "zi zi" sound, it means that the drain valve is working normally, indicating that there is something wrong with the drainage control circuit of the washing machine. The alarm will flash and the character "E 1" will be displayed on the display board.

Basic structure of washing machine:

The washing machine structure comprises a plastic cylindrical inner cylinder and a metal drum outer cylinder with at least one water outlet, and the inner cylinder and the outer cylinder are matched; The inner cylinder consists of a base, a cylindrical inner cylinder and a mouth ring; One end of the cylindrical inner cylinder is connected with the base, and the other end is connected with the port ring; The cylindrical inner cylinder consists of two side wall plates and two rib plates which are connected with each other.

The side wall plate is an arc plate with four contour edges, which are respectively connected with the base, the support ring and the rib plate and have a connection structure, and a plurality of dewatering through holes are arranged on the plate; The rib plate is an arc plate with ribs in the middle, and its four contour edges are respectively connected with the base, the port ring and the side wall plate, and are provided with connecting structures.

The plate is provided with a plurality of dewatering through holes, and when the side wall plate and the rib plate are connected to form a cylindrical inner cylinder, the ribs on the rib plate extend into the cylinder to play the role of lifting the rib plate.