The bright nail can adjust the light, and it is very smooth. It's like adjusting the volume of a speaker.
For example, the bedside lamp in the hotel.
thank you
Question 2: What does infinite dimming crystal lamp in lighting industry mean? The stepless dimming crystal lamp in the lighting industry is actually a dimming function. Literally, it can be understood that dimming has no limit.
If the lamp is equipped with stepless dimming function, you can adjust the lamp to different lighting effects through this function: for example, slowly brighten it up, dim it down, or slowly adjust it from another color to another combination color.
Question 3: What is the difference between stepless dimming of lamps and tricolor temperature? Stepless dimming is to control the change of thyristor conduction angle. The larger the conduction angle of thyristor, the greater its current, thus achieving the purpose of stepless dimming. The tricolor temperature is the light color adjusted on the basis of R.G.B tricolor. It can be said that stepless dimming and tricolor temperature are two completely different concepts.
Question: What does stepless dimming of led light mean? Brightness can be adjusted, instead of a fixed brightness, it can be smoothly adjusted between off and brightest.
Question 5: What is stepless dimming digital stepless dimming system (NDI, NDIS, E3, e3s)?
NiteCore Extreme adopts a unique digital stepless dimming system technology, and users can customize the brightness setting simply by rotating the lamp cap. The brightness transition is smooth, and there is no preset brightness limit. Users can choose suitable brightness output according to different environmental requirements, or set very low brightness to realize long-term continuous use.
Turn on the lighting
Half-press the switch to light the flashlight, release the button and the flashlight will go out. If you need to light the flashlight continuously, you can press all the switches until you hear a beep, and then let go. The flashlight will continue to illuminate until you press the switch again.
Switch between tactical mode and custom brightness mode.
NiteCore? Extreme has two working modes: tactical mode and custom brightness. When the flashlight head rotates clockwise, the flashlight is in tactical mode. In tactical mode, the user can make the flashlight work at full power output or perform flashing function. Loosen the lamp cap slightly, and the flashlight will enter the custom brightness mode. In this mode, the user can set the brightness of the flashlight by himself.
Switch to flash function
Make sure your flashlight is in tactical mode before using this function. After confirming the tactical mode, hold the barrel in one hand and the lamp holder in the other. The hand holding the lamp holder quickly loosens the lamp holder counterclockwise, and then immediately tightens it. When the flashlight enters the flash function. If you want to restore the full power output state, you only need to perform the loose-tight operation again.
Note: the loosening-tightening time cannot exceed 0.5 seconds, otherwise the flashlight function cannot be switched.
Use the custom brightness function
Loosen the lamp cap slightly to make the flashlight enter the custom brightness mode. After entering the custom brightness mode, hold the barrel in one hand and the lamp holder in the other. The hand holding the lamp holder quickly turns the lamp holder clockwise, and then immediately releases it. At this time, the flashlight starts the automatic stepless dimming process from high to low, and the whole process from maximum power output to minimum power output is about 6 seconds. If the brightness needs to change from low to high, just perform the tight-loose operation again. In the process of automatic stepless dimming, once the output brightness of the flashlight meets the user's requirements, the user can immediately press the switch to turn off the flashlight, at which time the brightness is selected and memorized, and then directly enter the brightness state after turning on the flashlight again.
Question 6: What is the wife's stepless dimming lamp? It is an LED lamp with WiFi networking control function, and the WiFi control elements are concentrated in the light bulb. The brightness or color of the light bulb can be infinitely adjusted by mobile phone or remote control.
Question 7: What does stepless dimming mean? Unlimited dimming, NiteCore Extreme adopts a unique digital stepless dimming system technology, and users can customize the brightness setting simply by rotating the lamp cap. The brightness transition is smooth, and there is no preset brightness limit. Users can choose suitable brightness output according to different environmental requirements, or set very low brightness to realize long-term continuous use.
Stepless dimming in the flashlight stretches the flashlight head and changes the distance between the lens and the lamp bead to achieve the purpose of adjusting the irradiation range of the light spot. The illumination range of the light spot changes continuously and smoothly, and the brightness also changes accordingly.
Question 8: What is the stepless dimming lamp like? Dimming with gears is not stepless dimming.
Theoretically, stepless dimming can adjust the brightness from the lowest brightness to the highest brightness at will. (such as the volume of headphones)
Question 9: What is the difference between stepless dimming and secondary dimming? It is urgent. It should be stepless dimming. "Grade" means "gear".
Stepless means continuous change, not jumping or grading, but tilting, not stepping.
Two-level or two-level dimming should be half-bright, full-bright and full-off, that is, there are two brightness adjustable.
It is best to choose the touch-sensitive control mode, and the use of mechanical switches or knobs will soon lead to poor contact.
Question 10: What does infinity mean in stepless dimming and color matching of LED lamps? It means stepless, shows no step change, and looks like a smooth transition to the naked eye instead of flashing and dimming.