Tire mold, rubber mold, polyurethane mold, polyethylene mold, PET mold, foaming mold, road injection mold, alloy die casting mold, hot core box and cold core box for casting can remove residual resin, invalid release film, carbonized film agent, oil stain and open air holes, and the mold will be as bright as new after cleaning.
On-line cleaning does not need to cool and disassemble the mold, which avoids the corrosion and damage of the mold by chemical cleaning method, the mechanical damage and scratch of the mold by mechanical cleaning method, and the decline of mold accuracy caused by repeated loading and unloading. Crucially, the two time-consuming steps of removing the mold and waiting for the mold to cool can be omitted, and the downtime can be reduced by about 80%-95%.
petrochemical industry
Clean the main fan, air compressor, hood, steam turbine, blower and other equipment to remove coking and carbon deposition in various heating furnaces and reactors. Clean the PVC resin on the heat exchanger; Remove oil stains, rust, hydrocarbons and dirt on the surfaces of various pressure vessels such as compressors, storage tanks and boilers; Cleaning the reaction kettle and condenser; Complex biological purification; Furnace tube cleaning, etc.
Food pharmacy
It can successfully remove baking residues, colloidal substances and oil stains in the oven, as well as the mixture of fresh products before baking. Effectively clean ovens, mixing and stirring equipment, conveyor belts, molded products, packaging equipment, stoves, stoves, containers, rollers, refrigerator inner walls, biscuit stoves, etc.
Benefits of dry ice cleaning: put an end to the use of harmful chemicals, and avoid production equipment contacting with harmful chemicals and generating secondary garbage; Prepare or remove bacteria such as Salmonella and Listeria, and disinfect and clean more thoroughly; Eliminate the damage of water jet cleaning to electronic equipment; The degree of equipment decomposition is small; Reduce downtime.
press
It is difficult to remove ink, and the accumulation of ink on gears and guide rails will lead to poor printing quality. Dry ice cleaning can remove all kinds of oil-based and water-based inks and varnishes, clean up oil stains, accumulated inks and dyes on gears, guide rails and nozzles, and avoid the discharge of harmful wastes and solutions and personal injuries caused by harmful solvents.
power industry
Can clean electric boilers, condensers and various heat exchangers; Can directly clean indoor and outdoor transformers, insulators, power distribution cabinets, live wires and cables (below 37KV); Generator, motor, rotor, stator and other parts are clean and free from damage; Clean the rust, hydrocarbon and adhesive powder on turbines, impellers, blades and other parts, without disassembling the blades and readjusting the dynamic balance of the blades.
automotive industry
Cleaning the doorskin, roof, carriage, car bottom and other oil stains will not cause water pollution; Cleaning of automobile carburetor and removal of automobile surface paint; Remove carbon deposits from the engine.
If the carbon deposit is treated, it will take a long time to treat it with chemical agents, at least more than 48 hours, which is harmful to human body. Dry ice cleaning can completely solve the problem of carbon deposition within 10 minute, saving time and reducing cost, and the scale removal rate reaches 100%.
electronic industry
Clean the grease and dirt inside robots and automation equipment; Clean the integrated circuit board, post-welding flux, pollution coating, resin, solvent coating, protective layer and photosensitive corrosion inhibitor on the printed circuit board.
astrospace
Pre-coating treatment and final assembly of missiles and aircraft; Paint removal of composite molds and special aircraft: engine carbon cleaning; Maintenance and cleaning (especially the landing gear-wheel well area); Depainting of aircraft shells: jet engine conversion system. Can work directly in the body, saving time.
shipping industry
Hull; Seawater suction valve; Seawater condenser and heat exchanger; The machine room, machinery and electrical equipment are cleaner than ordinary high-pressure water jet cleaning.
nuclear industry
If the nuclear industry equipment is cleaned by traditional cleaning methods such as water, sand blasting or chemical detergent, the media such as water, sand blasting or chemical detergent will also be polluted by radioactive elements, so it takes time and money to treat these secondary polluted media. In the process of dry ice cleaning, dry ice particles are directly sprayed on the object to be cleaned, which instantly sublimates, and there is no problem of secondary pollution. All that needs to be treated is the cleaned waste with nuclear pollution and scale.
General manufacturing industry
Cleaning oil stain, paint, ink, adhesive, carbon deposit, asphalt, surface rust, industrial fan, welding slag, electroplating coating, etc. Other industries and fields.