1, five groups of middle long needles are reserved at the toe cap, and the sixth needle is taken to stand up 1 needle, and then two middle long needles are placed in each pinhole of the five groups of middle long needles.

2. The medium and long needle thread head should not be too long, and it is best to keep it around 1- 1.5cm, and the pinhole gap of needle drawing should not be too large.

3. After the first thread is finished, pull it out at the pinhole of the seventh needle and hang a mark button.

4. Starting from the second line, take the waistline on the knitted shoe ring instead of positioning it on the side of the upper with other colors to ensure that the row spacing is almost the same, which can ensure the beautiful shoe shape.

5. In case of disconnection or discoloration, try to change it in the middle of the control line, which can not only play a control role, but also leave no trace when changing lines. The starting point and end point of each row should be compared with the control line to ensure that both sides are balanced and beautiful.

6. Taking the 38-yard foundation as an example, the optimal row number of each shoe is about10-1,the length of the upper is about 15cm, and the height of the shoe hole is 7-8cm.

7. After knitting one, don't cut it off in a hurry. Wait until the second one is finished. If the length and width are different, you will encounter thread ends, so as to ensure that there are fewer thread ends.

8. Close the hidden thread as far as possible through the bottom of the insole, arrange the potholes in the vamp with crochet, and stir on the opposite side to ensure smoothness.