Generally, there is little white paper, which is considered unlucky.

In order to prolong the life of glass and improve the aesthetics, glass will be pasted.

Glass pasting method:

1, cutting: when cutting the glass sticker, its length should be about 1 cm higher than the glass length, which can effectively avoid sticking crooked or causing repeated pasting.

2. Cleaning the glass: clean the glass before pasting the glass glue, and then spray some water on the cleaned glass to reduce the viscosity of the glass glue, so that its viscosity will not be affected after drying.

3. Remove the release film on the other side: after removing the release film, sprinkle some water on the back of the glass paste, which is convenient for later construction. During the paving process, the paste can be moved to find a suitable position.

4. Paving: measure the size on the glass, aim at the upper end of the glass, and stick it from top to bottom. If it is not aligned once, you can tear it again before paving it.

5. Bubbles: Scrape the bubbles off the sticker with a scraper. If the bubbles can't be discharged, puncture them with a needle, and then smooth them so that they are completely attached to the glass.

6. Cutting the rest: After paving, cut off the rest with a blade.