2. The starting power of the spotlight is higher than the normal working power. Therefore, the power supply should be directly connected from the electric well with a cable of more than 2.5 square meters. Prevent the power source from being overloaded and tripping, and what's more serious is that too many wires are in debt and cause a fire.
3. Position and height requirements of spotlight. If you use two lights and a bench when you go on stage. The other bracket is used to fill the light when entering the stage. If there is a third spotlight, it should be placed at a distance parallel to the second spotlight, each spotlight occupies a corner of the scene, and there is no building in front. The height of the lamp is more than 2.5 meters, and the lamp head is not directly exposed to the human eye. The on-site operation support is suitable to be placed on the table, but it must be stable, and the spotlight will not scratch when it rotates left and right.
4. After the spotlight is turned off, it needs a cooling time of at least 15 minutes before it can be used again; If you turn it off and turn it on again immediately, it is very likely that the light source will not light up and the light bulb will burn out; If you need to change the light bulb, wait until the machine is cold. Don't touch the glass in the middle of the bulb. Be firm when installing. The vent of the lamp body should be unblocked, so as not to affect heat dissipation.
5. spotlight belongs to the high-end equipment of wedding scene. The equipment is expensive, bulky and complicated to operate, so someone must take care of it. Handle with care during transportation to minimize vibration and avoid abnormal operation caused by poor line contact. The spotlight has a special turnover box.