1. Before electrifying, check whether the local power supply meets the requirements of technical parameters.

2. Before the first use, please put the foamed oil into an oil pot equipped with a foaming machine and tighten the lid of the crude oil pot. Then quickly turn the oil pot upside down, align the hole on the pot cover with the ejector pin in the oil tank at the back of the chassis and press it down, so that the bubble oil in the oil pot will slowly flow into the oil tank and flow into the oil tank in front through the pipeline in the machine. When the liquid level rises to a certain height, the bubble oil in the oil pot will automatically stop flowing out. At this point, you can use the bubble machine.

3. How to use the remote control:

A. After the power is turned on, the fan and bubble tray of the bubble machine will not start working immediately, and the machine must be controlled by the remote controller.

B. There are red and gray buttons on the remote control panel. Press the red button and the fan and bubble tray on one side will start working. Press the red button again and the fan and bubble tray on the other side will stop working. Press the gray button, and the fan and bubble tray on the other side will start to work. Press the gray button again, and the fan and bubble tray on that side will stop working.

4. The use of manual control method:

There are two manual buttons on the back of the cabinet, which can also be used to control the operation of the bubbler.

B. If the button above is pressed for the first time, the fan and bubble tray on one side will start to work; If you press the button again, the fan and bubble tray on the other side will also start working; If you press this button for the third time, both the fan and the foam tray will stop working.

C. If you press the bottom button for the first time, both the fan and the foam tray will start working. If you press the button again, the fan and bubble tray on one side will stop working, while the fan and bubble tray on the other side will continue to work. Press this button for the third time, the stopped fan and bubble tray will rotate, while the original working fan and bubble tray will stop working.