Stone carving machine shopping point:
1, pay attention to the function of engraving machine:
The carving motor in the stone carving machine can be divided into high power and low power. Some low-power engraving machines are only suitable for processing materials such as bicolor boards, building models, small signs and three-dimensional handicrafts. This technology has been popular for some time, but because of the low engraving power, its application scope has been greatly affected. The other is a engraving machine with high-power engraving head, which is divided into two types: one is a large-format cutting machine: the width is generally more than one meter, but the accuracy of this engraving machine is generally poor; The other is a engraving machine with moderate width: this engraving machine is generally used for fine processing and organic logo making, so when purchasing stone carving machine, you must first make clear the type of engraving machine you need, and then make the following choices.
2, pay attention to the performance and function of the motor:
The engraving head motor of the engraving machine is also very important, because the engraving head motor generally does not belong to the warranty scope, and the engraving head motor works continuously for a long time, so if the engraving head motor is not good, it will also affect the use of the engraving machine.
3, pay attention to the motor speed adjustable range:
The general adjustable speed range is several thousand to 30,000 revolutions per minute. If the speed is not adjustable or the adjustable speed range is small, the application scope of the engraving machine is greatly limited, because different engraving heads must be used to engrave different materials. ?
4, engraving machine body manufacturing process: high-power engraving machine must be precise and stable when working, so long-term high-power engraving should use casting machine body to ensure its processing accuracy and stability. ?
5. Controllers are generally divided into two types: one is driven only, and all its operations are completed by computers. When the engraving machine is working, the computer is in a waiting state and cannot do typesetting. The other controller is controlled by a single board computer or a single chip microcomputer, which is actually a computer, so as long as the engraving machine starts to work, the computer can immediately carry out other typesetting work, especially when engraving for a long time, which is particularly obvious.
Although the small stone carving machine is far less bulky than other large construction machinery, it is still an indispensable mechanical product in modern construction industry. In order to make carving more time-saving and labor-saving, and the products carved are beautiful, Bian Xiao suggested that you must consider the above aspects to ensure the purchase of a correct and excellent stone carving machine.