Stage lighting operation flow (1) operation flow

1, half an hour before the opening, turn on all equipment, preheat at low temperature, and test all equipment and lines at the same time. Low temperature state means that the light is slightly brighter;

2. After starting 15 minutes, zero all the equipment, and let the equipment dissipate heat for not less than 15 minutes;

3. After heat dissipation, you can formally enter the stage of music performance;

4. After the performance, after the guests leave, the lighting engineer should turn off all the equipment, let the equipment dissipate heat for 15 to 20 minutes, and then seal or cover the equipment before leaving. Maintenance of lighting equipment is more complicated and trivial than that of sound, and it is basically routine inspection every day, regular inspection every week, monthly equipment maintenance and proper debugging;

Conventional detection range includes:

1, whether the light bulb can be lit normally;

2. Whether all equipment connections are normal;

3. Whether all equipment can be used normally, including lighting control switch, color changer control, computer lighting action, etc.

4. Whether DMX512 signal can control lamps normally;

5. Whether the special equipment is used normally and whether the required materials are filled, such as smoke machine, snowflake machine, bubble machine, etc.; In addition to all daily monitoring items, the following points should be paid attention to in the weekly regular inspection.

1. The weekly inspection is mainly to check the connection of equipment, including power supply connection, DMX5 12 connection, etc. , to see if there are loose, breakpoints, etc.

2. At the same time, it is necessary to comprehensively adjust the lamp position and DMX5 12 programming during the weekly inspection; In addition to all the work of daily monitoring and weekly inspection, an appropriate monthly meeting is a very detailed work, which requires the cooperation of actors, bands, weak electricity, security, cleaning and other departments. At the same time, the following work should be completed during the monthly inspection.

1, lamp position adjustment; Because in use, there will be some changes in the lamp position or guest area, which will lead to the change of the lamp position, so the lamp position should be adjusted equally every month, including of course the computer lamp controlled by DMX5 12 signal;

2, mechanical equipment testing, including computer lamp motor, color changer motor, special equipment nozzle, etc. ;

3. Check all lines. Check whether there are breakpoints, broken wires and electric leakage, because in the process of use, there will inevitably be various accidents caused by human factors, such as bare wires with broken wires, wires or breakpoints that are frequently plugged and unplugged, and occasionally the lines will leak or even short circuit due to drinking. So this test should be very careful. This test requires a weak current to complete;

4. Clean up the dust and garbage inside and outside the lamps. There will also be some rubbish in the use of the lamp itself, such as the rubbish left in the lamp body after the explosion of the light bulb. In addition, computer lights and special effects machinery exposed to the audience area for a long time are also easy to fall into some garbage, such as ribbons, glass slag, beverage residue and so on. Therefore, it is necessary to clean up the garbage and dirt outside the lamps and remove the garbage inside the lamps and lanterns.

5, check all fire prevention equipment. Lighting and audio are the most concentrated types of work in the circuit, with strong electricity coming in and weak electricity coming out, and many related equipment and wires. Therefore, fire prevention is the top priority of lighting work. In the monthly routine inspection, we should cooperate with the security department to conduct a comprehensive inspection of all fire prevention facilities and fire fighting equipment, including the normal degree of fire fighting equipment, whether the selection of fire fighting equipment is normal, whether it is within the warranty period, etc. Of course, in addition to the above-mentioned daily monitoring, weekly inspection and monthly comprehensive inspection, lighting engineers must also be very familiar with all the conditions of equipment and environment, and please deal with anything in time, so as to obtain a good visual environment and adequate security.

Official website website of Guangzhou Yifa Stage Lighting Equipment Factory is/

Guangzhou Yifa Stage Lighting Equipment Factory is engaged in the development, research and development, production and sales, project undertaking, installation, debugging and wholesale of stage lighting equipment, 230W spotlight manufacturers, computer-shaking spotlight manufacturers, spotlight manufacturers, 280W spotlight manufacturers, Guangzhou Stage Lighting Factory, stage lighting equipment manufacturers, 330W spotlight manufacturers, 5R scanning lamps manufacturers, LED pa lamps manufacturers, spotlight manufacturers and customized pattern lamps manufacturers.