Exercise:
1. Prepare the required cloth, and cut the upper body fabric and skirt in turn according to the drawing. (The hem is a 360-degree round skirt with short front and long back)
2. Sew the front and back cloth flat, and then sew the front and back lining flat.
3. The shoulder seams of the face cloth and the lining cloth are spliced separately.
4, as shown in the figure, hot invisible zipper standby (note that the iron temperature is not too high, otherwise it is easy to burn the zipper teeth. )
5. First sew the invisible zipper on the back of the face cloth. When finished, sew the back of the interlining and the front of the fabric with an invisible zipper.
6, respectively, the tablecloth and interlining side swing seam flat-fell seam.
7. Sew the collar between the face cloth and the lining cloth from the invisible zipper of the lining, then trim the seam and cut off the arc of the collar to make it more docile.
8. After the completion of step 7, the seam of the collar falls on the interlining, and the pressure of 0. 1CM on the front of the interlining is obvious, in order to make the collar more obedient.
9. Sew your favorite lace on the back seam of the front and back pieces of the knife.
10, step on the cuff and waist to fix it.
1 1. After the sleeve seam is spliced, sew it with the armhole of the garment, and then sew the armhole lock edge.
12, cuff edge seam.
13, put on a pleated presser foot, and pleat the waist of the skirt. When finished, the circle is the same size as the upper waist of the skirt.
14. Sew the upper waist of the skirt and the waist of the mass hem together, and then lock the edge.
15, hemming seam of skirt hem, hemming width is about 0.3CM.
16. After all the above steps are completed, plug in the iron and iron the skirt.