If you want to lay the carpet correctly, the first thing you should do is to keep the floor clean. Before laying the floor, remove the garbage and some small sawdust or stones from the floor. Only when the floor is cleaned can the carpet be laid.

Second, the ground is flat.

Be sure to keep the floor flat before laying the carpet. If a wooden floor has been installed at home. In this case, you can directly lay the carpet. But if the home is a cement floor, in this case, you should check whether the cement floor is flat or not. For uneven places, it is necessary to repair them in time.

Third, the carpet is fixed.

After ensuring that the ground is flat, you can start laying carpets. Carpets can be fixed or not. If it is not fixed, put the carpet on the ground and aim the four corners of the carpet at the corner. If it is a fixed carpet. In this case, the floor can be sewn directly with adhesive or directly with needle and thread.

Fourth, measure the length and width

When laying carpets, we should measure the length and width in particular. The length of the carpet should be slightly longer than the length of the room. This will leave some space when laying the floor. When determining the width, be sure to put down the width of the buckle.

Fifth, pay attention to the direction of wool weaving.

After measuring the length and width of the carpet, there is another problem that needs special attention, that is, pay attention to the direction of wool when laying the carpet. The knitting direction of wool should be the same. If you don't pay attention to the direction of wool weaving, it may lead to the phenomenon of yin and yang in the carpet, which looks very uncoordinated and uncoordinated.

Sixth, follow the light.

In the process of laying carpet, we should also pay attention to follow the light when laying carpet. If the wool direction of the carpet is opposite to the light direction, after the carpet is laid, due to the direct irradiation of light. Wool weaves in the opposite direction. As long as there is sunshine in the next few days, the carpet will feel particularly messy.

Seventh, splicing carpets.

After the wool direction of the carpet is determined, in this case, it is necessary to directly splice the carpet. When splicing carpets, you can fix them from one side first. Then use related equipment to tighten the carpet, and then sew the carpet in other ways.

Eighth, fixing and cleaning

After the carpet is spliced, in this case, the carpet can be fixed directly with air nails. After the treatment, you can clean the whole floor directly with a vacuum cleaner, and the carpet can be used normally.