Industrial use: quick-drying adhesive, epoxy adhesive, polymer adhesive, acrylate adhesive, etc. Can be used;
Non-industrial use: hot melt adhesive, solvent-based adhesive and latex can be used. So it depends on your requirements.
In this case, because the wedding dress has chemical fiber, it is recommended not to use industrial glue. You can refer to the following special bonding fabrics.
1), JL-606 dry water-based laminating adhesive: The dry water-based laminating adhesive produced by this technology has low viscosity, high strength, high brightness, low dosage and low cost. (about 5-7 grams of laminating glue per square meter) For various paper products with a weight of grams, laminating can be used for cutting without warping. After all kinds of paper products are covered with film, they can be indented, die-cut, embossed with UV, coated with concave and convex and sanded at any time to achieve the desired effect. Glass card, white card, white cardboard, copper plate, gray background white, rubber plate, metallic ink, aluminum plating and embossing can all be laminated with high quality. L-606 dry water-based laminating adhesive is an environmentally friendly product, which is water-based, non-toxic, non-polluting, non-flammable and non-explosive, and has no irritation to the skin. Meet the requirements of human health. JL-606 dry water-based laminating adhesive is a substitute for traditional oily laminating adhesive, which has no peculiar smell in the place and excellent working environment. JL-606 dry water-based laminating adhesive has high quality and excellent comprehensive properties. Composite products can tear ink, have good brightness, can be embossed and pressed. No bubbles, good toughness, smooth and beautiful appearance, high bonding strength, and no glue opening when wet. The dry water-based laminating adhesive of the invention can be used for bronzing, printing gold, rolling lines of composite products and rolling three-dimensional patterns, without being affected, and the patterns are vivid and three-dimensional and will never change color.
Scope of application: It is suitable for compounding biaxially stretched polypropylene (BOPP), polyester (PET) films and laser films with various color printing papers and non-woven fabrics. It has high adhesion to BOPP, PET, PVC film and ink, and can tear off ink. Suitable for crude oil laminator.
2) JL-808 water-based PVC patch adhesive: It is a kind of acid ester ethylene-propylene emulsion containing special functional monomers, which has strong adhesion to difficult-to-stick substrates and good temperature resistance. High solid content and excellent adhesion. It has heat resistance, water resistance, alkali resistance, yellowing resistance, good viscosity, soft film, good fluidity and good operation safety.
Scope of application: widely used in: fitting factory (cloth to cloth, cloth to PS board), lampshade factory (cloth edge, paper edge, iron wire) clothing factory (bust fitting, cloth to cloth, cloth to sponge, shoulder pad fitting, etc. ).
3) JL-2042 water-based nonwoven laminating adhesive: It is a unique emulsion adhesive with excellent adhesion and good wettability to BOPP, PVC, PET, 0PP and release paper.
Scope of application: suitable for the combination of film, TC cloth, plastic sheet and non-woven fabric or color printing paper.
Tips: The above adhesives should not be mixed with other adhesives, and there will be slight delamination after long-term storage. Please mix well when using, and the container must be tightly covered when storing. It is forbidden to expose to the sun, and the residual glue should be cleaned with water. Storage temperature: 5-40℃.