Tools, consumables and main parameters: the tool is 1.75mm crochet. Although it is not a big model, the finished product is still 42 cm high, which can be said that the scale is quite amazing. The eyes are oval, and there are obvious white spots when you look closely. The size is unknown, so it may take time to find them.

In addition to iron wire, pearl cotton, embroidery needle and embroidery thread, thick shaping strips should be prepared to fix the huge head. Then prepare some white and red non-woven fabrics for details such as eyes and mouth. Besides, don't forget two buttons of the right size.

The body and head are connected into a whole, woven from the bottom to the hook. Remember to put cotton on the side of the hook, so that the overall effect will be more uniform and firm. The neck shaping strip can be made of iron wire with good stability. After all, the head is really big, especially after cotton stuffing, so you can imagine how heavy it is. If the plastic strip is not well made, it will really collapse.

The head is woven around the plastic belt, which is also hooked and stuffed with cotton. In this process, the forming belt is basically centered. Wrapping with soft cotton can not only effectively avoid potential safety hazards, but also facilitate the later posing.

This kind of short heel needle is difficult to operate and needs to be as round as possible. If you really can't do it, you can also separate your feet, hook the needle into a circle, and then leave the thread to sew on your heel after crocheting.

Finger connection is more conventional, that is, an orderly loop hook around the outer needle of several hooked parts. Here, because the length of each finger is different, it is simply marked with label paper, which can be followed.

Each ear consists of two basic types. Remember to align the two backs when connecting. If you are afraid of being too unstable, you can also consider adding cardboard to strengthen it.

Eyes are the highlight of the whole doll, including the joint between the bottom and cheeks, the finished eyeball and the white gasket under the finished eyeball. Later, it was decorated with black lines, which was very layered. The shaping of the cheek is the most important, so you need to use the positioning needle to locate it, and then carefully sew it with cotton, and never go out of shape.

The assembly of facial details can refer to the attached drawings, and the basic dimensions and positioning are here! In addition, the tail is very distinctive, from coarse to fine, and the details are almost perfect, which is very worth learning.

Shorts are designed to hook the whole body first and then divide the legs. In the picture, each trouser leg takes up 32 stitches. After finishing the two trouser legs respectively, align the seams at the crotch and sew.