Mix the floor paint first, because you can't use it directly after you buy it. You must mix it first before you can construct it on the ground. Then paint the floor on the bottom, which we call primer painting. Need to paint the middle floor. Brush the top layer on the painted surface of epoxy floor.
Steps to be followed in the construction of floor coatings:
Step 1 is the basis of foundation treatment. If the ground needs to be sanded, polished, cleaned and scrubbed, it should be cleaned.
The second step begins to brush the bottom layer, that is, the ground brush 1 permeable ground.
The third step is to wait a few hours in the middle, and then start the partial construction of the middle wall after it is completely dry. Generally, the material used in the middle part is quartz sand, and you can also directly make it into floor paint for construction.
The fourth step is grinding, because after the construction of 1 layer and the second layer is completed, it needs to go through a hardening process, and the hardened surface will be obviously thickened, so it must be polished once before the next process can be carried out.
The fifth step is topcoat treatment, which is the top layer of floor paint we see.
The sixth step is polishing, because after all the work is done, overall polishing and cleaning is also an essential workflow.