First, the glass door sticker price
1, price:? 38.00 yuan/set
Funlife kaleidoscope glass door sticker? Creative self-adhesive decoration for bathroom door renovation? Waterproof door stickers DM0 15
Manufacturer: Shanghai Gaudi Network Technology Co., Ltd.
2. price:? 0. 12/ piece
Customization? Advertising push-pull stickers? PVC sliding door stickers, advertising electrostatic stickers? Glass door stickers? Push-pull sticker manufacturer
Manufacturer: Cangnan Feixiang Color Printing Factory
3. price:? 4.20 sets
Factory direct sales? New XL83 1 Christmas tree window living room glass door Merry Christmas holiday decorative wall stickers
Manufacturer: Yiwu Fanxi Electronic Commerce Co., Ltd.
The price source network is for reference only.
Second, how to stick the glass door film?
1, familiar with tools, good size.
Key points of construction: check whether the tools are in good condition and measure the size from the same side of the window;
Before pasting the film, we should prepare at least four tools: scraper, watering can, art knife and ruler, and carefully check whether the tools are flat, smooth and cracked; Then we measure the length and width of the window. When measuring the window size, we must start from the same side of the window.
2. Film editing
Key points of construction: pad soft cloth, the film edge is aligned with the center line, and the size is 5-8 mm smaller than the glass;
Take out the film, check the size and quantity of the film, and put a blanket or soft cloth under it to avoid scratching the floor; When cutting, align the edge of the film with the center line for cutting. The cutting size is 5-8mm smaller than the glass size, and the back is coated.
Step 3 clean the glass
Key points of construction: spray water for several times to make it clean, hairless, dust-free and sand-free;
The glass must be wiped clean, which is very important for the effect of film pasting. Clean the glass thoroughly. Spray more water, scrape it with the film several times, so that the glass does not shed hair, dust and sand, and then spray a layer of water after cleaning the glass.
4. About movies
Key points of construction: spray lubricating liquid to reduce the viscosity of adhesive layer, cross first, scrape the film in the middle and then scrape the film on both sides;
The membrane is divided into two layers, one is colorless and transparent, and the other is sticky and colored. Before coating, spray lubricant to reduce the viscosity of the adhesive layer, and then tear the protective film while sticking the film, and adjust the position of the film on the glass window. The action is to cross the membrane first, then scrape the membrane from the middle to both sides, fix the membrane, and drive out the bubbles from both sides, with light force to avoid scraping the membrane too hard.
5, scraping the film to catch water
Key points of construction: small towel absorbs water, corners are trimmed and wiped with dry rag;
Spray lubricant on the film to separate the protective film from the film. The action direction is the same as the previous step. Scrape off the water vigorously, and use a small towel to absorb the scraped water. Finally, trim the corners where they are not scraped, tear off the protective film, and complete the film pasting. When all the windows are covered with film, spray a small amount of detergent to remove other residues. Wipe with a dry rag to make the window smooth and bright.
Although the glass door sticker looks no different from ordinary stickers, it has many advantages and functions because it is attached to the glass door. For example, on the one hand, it can prevent some consumers and friends from hitting glass doors or windows because of negligence. On the other hand, the choice of flower patterns and styles of glass door stickers is also very rich. We can also seek customization from professional manufacturers according to our own needs. For example, we can harvest a unique sticker by referring to the slogan and logo of our own organization to achieve the advertising effect.