1, Insert-Basic graphics-Select a rectangle (like the length and width of the scroll bar)-Set optional graphics format-Fill color-Fill effect-Double color (select the color of the scroll bar)-Vertical. At this step, the scroll is ready. Let's do the effect below.

2. Select the copy-and-paste scroll, put two overlapping scrolls together, and put a picture you want to open under the scroll. When the scroll is opened, the actions start as follows: right-click to select the middle scroll-customize animation-enter-erase-select the direction you want to erase-select the action path in the adding effect-set the length and direction of the scroll unfolding path-double-click the selected path-remove "balance start" and "balance start".

3. Open the picture with the scroll: As in the above steps, expand the picture, right-click to select the middle scroll-customize animation-enter-erase-select the direction you want to erase-stack order-and put it at the bottom.

Basically follow the above steps, and say something unclear.

How to make dynamic scroll PPT 1 After opening PPT, click "View" in the menu bar to view the grid and reference line in the display screen; (At this time, many networks will appear in the editing interface, with a vertical centerline and a horizontal centerline in the middle. Using this network, the location of the editing object can be easily determined. )

2. Click "Insert", select a rectangle from the "Shape" drop-down list, draw a rectangle in the editing interface, resize it and place it on the left side of the vertical centerline;

3. Select the rectangle, click "Drawing Tool Format" and set "Shape Outline" to "No Outline";

4. Click "Shape Fill" to set it as gradient, and choose any gradient method;

5. Insert an ellipse at the upper and lower ends of the scroll, and the effect is as follows;

6. Select the rectangle and two ellipses you just drew, select "Combination", and then copy another scroll and place it on the right side of the vertical centerline;

7. Set the left scroll bar to add animation "Other Action Path" to "Left", and add "Right" animation to the right scroll bar in the same step;

8. Insert a picture, and change the picture to an appropriate size by dragging the control points around the film or cutting, so that the height of the picture does not exceed the height of the scroll, and the width of the picture is flush with the end points (red arrows) of the two paths;

9. Click the selected picture, click the next layer in the picture tool format, and select "Send to bottom layer";

10, add animation to the picture as "Split"; The effect option is set to "center expands to the left and right", the initial setting is "at the same time as the last animation", the duration is set to 3s, and the delay is 0.25s The duration of the two scrolls is set to 3s, and the delay time is 0.

1 1, and the final effect is shown in the figure.

How to make the scrolling animation effect of ppt We often see a picture slowly opening in the screening of PPT, and the picture is very beautiful. Do you know how to do it? Let's take a look at how ppt makes scrolling animation effects!

Tools/materials

Computer, PPT

0 1

First find a picture on the Internet as the content of painting, create a new PPT, and double-click to open it.

02

Set the page background according to your own preferences, then click Insert Picture, select the picture that has been downloaded in advance, and click Insert.

03

After inserting the picture, adjust the size and position of the picture, as shown in the figure below.

04

Click Shape in the insert to select a rectangular box. After insertion, adjust the color of the rectangular frame according to your own needs. The rectangular box is located in the middle of the picture, as shown in the figure below.

05

Select the rectangular box, and click to move down one layer, as shown in the figure below.

06

Then click Cylindrical in the inserted shape.

07

Insert two cylinders so that they are higher than the rectangular frame, and then adjust the colors and positions of the cylinders, as shown in the following figure.

08

When the material is ready, start animation, click animation, and then click the animation pane.

09

Select a picture, add a split animation, and select the effect of spreading from the center to both sides. Then set the duration of the animation to 5s.

10

Select the left and right cylinders respectively, add the left and right paths for them, and set the animation duration to about 5s.

1 1

Select two cylinders, click Add Animation, and then select Zoom In or Zoom Out. The effect option is horizontal, and the effect setting size is 70% (adjusted according to the actual situation), as shown in the following figure.

12

Select the rectangular box, add the animation as "Zoom in or Zoom out", the effect option is horizontal, and the effect setting size is set to 3 10%, or it can be a little larger.

13

After the animation is set, note that the four animations are "at the same time as the last animation". After the above settings are completed, you can play them.