There are only two uses of inkjet works, one is outdoor advertising, and the other is the production and output of indoor advertising pictures. At present, the price of finished inkjet products is generally calculated by the output area, that is, the actual number of square meters multiplied by the price per square meter, and the design fee is generally charged according to the difficulty. The following is a list of two general materials: 1. Indoor spray-painted advertising materials 1. Car body sticker: This kind of spray-painted sticker has good adhesion and sun resistance, and is generally used for spray-painted stickers on car bodies.
2. Outdoor silk cloth: used for more romantic and elegant display occasions.
3. Outdoor outdoor light cloth: We saw a large outdoor ink painting, which belongs to the light shooting from the outside to the cloth.
4. Outdoor and indoor lighting cloth: We saw the spray painting on the outdoor signboard, which belongs to the cloth sprayed by the light in the light box.
5. Single-hole penetration: the material stuck on the car body glass, used together with the car body sticker.
6. Grid cloth: mesh spray paint material, which is used for the special expression of guests to reflect the style. Note: It is best to store inkjet images in TIF format, but JPEG format can be stored for convenience of transmission. Documents in Coreldraw, Freehand and Illustrator formats must be converted into curves. Second, indoor inkjet advertising materials
1. Silk cloth: spray-painted material similar to silk, used in more romantic and elegant exhibition occasions, such as clothing stores.
2. Canvas: used for more romantic and elegant exhibition venues, with a certain oil painting texture, which can be used for wedding photography.
3.PP film: that is, we commonly call it a poster. It's exquisite and accurate, but it doesn't have its own rubber surface on the back. Customers can stick it on the wall with double-sided tape, which can be used many times.
4. Transparent tape: another kind of tape, but this kind is transparent and is mostly used for posting at the door. This kind of material is noble and generous, which is the choice to show the company's image.
5. Photographic paper: also known as poster, it is a kind of exquisite photographic paper with high precision and no self-adhesive surface, and is often used to make Yi Labao, X booth and other booths.
6. Light box piece: the exquisite painting in front of the light box is different from the painting on the signboard we usually see, but is used for the painting on the menu light box of McDonald's, which has the characteristics of exquisite image and moderate light transmittance.
7. Glue-backed ordinary board: glue is pasted on a special KT board similar to foam board, and then edges are added around it to form a picture frame. This material is light and can be used for company decoration and exhibition.
8. Adhesive-backed high-quality board: The difference from ordinary board is that there will be no bubbles on the board after long-term use.
9. Adhesive-backed PP paper: The difference from PP film is that it has its own adhesive surface, and customers tear off the adhesive film and stick it on the wall.
For indoor use, the output picture is generally only a few square meters in size. Limit the maximum width at one end 1.5m ... After the output image is completed, it is necessary to cover the film (guests can choose light film or separate film) or install the board to be the finished product. High output resolution and clear color saturation. Outdoor accuracy will be relatively small, the size is not limited, and no film is needed. What problems should be paid attention to in outdoor inkjet advertising consumables
Ink-jet advertisements are often used outdoors. In the process of inkjet production, we must consider the outdoor environment and adopt the most suitable inkjet materials and technologies. Our Beijing inkjet printing company will popularize relevant knowledge for everyone. 1 The outdoor spraying advertisement takes a long time, and the surface protective film may appear bubbles, wrinkles or peeling. In this case, attention should be paid not only to outdoor painting, but also to indoor painting, such as Yi Labao and X-frame, which need to be reused. This is mainly caused by two reasons. First, the pressure in the process of laminating is not enough, which leads to the poor combination of protective film and inkjet paper, leading to the entry of air or water vapor. The other is the quality of the protective film, such as the toughness and thickness of the protective film, and whether to use fast glue or continuous glue for gluing. At present, the quality of protective films on the market is different. It is best to cooperate with trusted merchants to avoid many after-sales problems.
2. In order to avoid warping, when making human body advertisements or local painting pictures in the light box, the periphery must be sealed and treated with water. Specifically, it is three-second glue, liquid film, waterproof wax and so on. Can be used for edge processing.
Outdoor adhesive material, the surface coating is waterproof and ultra-fine three-layer superimposed structure, super white and delicate, and the gaps in the coating are arranged at fixed intervals, which can firmly lock the ink, make the color fine and improve the color saturation. High-quality adhesive can ensure long-term outdoor storage, and its viscosity increases gradually with the passage of time, which can make the paste more firm.
Indoor adhesive tape is developed by using new technology, with delicate and matte surface and effective waterproof. It can be used for dye ink, pigment ink and outdoor storage for a short time.
The light box cloth based on oily ink can be used outdoors for a long time. Mainly used for scraping cloth, the coating is waterproof and has strong tensile ability.
Causes of lighter color in inkjet printing
People who have been engaged in inkjet production for a long time may have this experience: in the process of inkjet printing, sometimes there are some small problems that need to be cleaned up. When inkjet printing continued after cleaning the nozzle, it was found that the color became lighter, especially when spraying solid color (double color). Our Beijing inkjet printing company has such experience. What's the reason? This situation is more common in the equipment with four colors arranged up and down and relatively little ink output, and the reason can be found from the mechanism of this equipment. Ink is generally volatile and will dry after a long time. However, if it takes a long time to clean the nozzle, this happens exactly: the ink that has been ejected has penetrated into the inkjet medium, and after a long time, the ink will dry, and it is difficult for the newly ejected ink to merge with it, so there will be a phenomenon that the broadband color becomes lighter. If the reason is found, corresponding measures can be taken, mainly to prevent the ink from drying out. The best way is to check the nozzle in advance and clean it if necessary, so as to avoid cleaning the nozzle in the process of inkjet printing to the maximum extent. There is also a large indoor humidity, which slows down the evaporation of ink. If the nozzles must be cleaned during inkjet printing, they should be cleaned as soon as possible, or several nozzles should be cleaned separately to avoid color difference. In addition, the solution can be found in ink, and additives can be added to increase the adhesion of ink, but the production cost of ink will also increase. Ink-jet printing companies always want low cost and good quality, and so do our Wasai advertisements. But we always adhere to the principle of quality first. In order to meet the requirements of customers, it is no problem to raise some costs. This is also the reason why our Yi Labao, X-frame and kt boards are of very good quality and our customers are very satisfied. portraiture
Inkjet printing generally refers to the output of outdoor advertising pictures. The media is generally advertising cloth (commonly known as light box cloth), using ink and wash. In order to ensure the durability of both sides, the color of the picture is generally darker than that on the display. Its actual output image resolution generally only needs 30~45DPI (compared according to printing requirements). Portrait generally refers to indoor use, and its output page is generally several square meters in size. Generally, the maximum width is1.5m. The medium is generally PP paper and lamp, and water-based ink is used. After the output image is completed, it needs to be coated and mounted. The output resolution can reach 300- 1200DPI (different models have different colors), and its color saturation is clear. Do inkjet and photo file making require bleeding position?
There is no need to leave a bleeding part. In inkjet printing companies, there are usually white edges after outputting outdoor advertising pictures. The general margin is 10CM. As shown in the figure, you can negotiate with the inkjet output company how many edges to leave for buttonholes. The price is calculated in square meters, so the screen size is in centimeters. The photo output image does not need bleeding, just make a picture according to the actual size. What are the requirements for image resolution in inkjet and photo files?
There is no standard requirement for the resolution of inkjet images. Please refer to the following data (resolution/m2):
Above11.25/180 22.5/30-18045/1-30.
Note: Since most current inkjet printers require images of 1 1.25DPI, 22 .5DPI and 45DPI for output, reasonable use of image resolution can speed up drawing. Generally speaking, 72DPI/ inch is enough for taking pictures. If the image is too large (for example, the file size exceeds 200M when displaying the actual size of a new image in PHOTOSHOP), the resolution can be appropriately reduced and controlled within 200 m ... What are the requirements for document image mode in inkjet printing and photographing?
Ink-jet printing uses CMYK mode uniformly, and RGB mode is prohibited. Nowadays, inkjet printers are all four-color inkjet printers, and the color and printing color are completely different. Of course, when making drawings, they follow the printing standards, and the inkjet printing company will adjust the color of the pictures to be close to the samples. Photos can be in CMYK mode or RGB mode. It is best to use CMYK mode. Note that the value of red in RGB is defined by CMKY, that is, M= 100 Y= 100. What are the requirements for the black part of the image in inkjet printed and photographed documents?
It is forbidden to have a single black value in inkjet and photo images, and three colors, C, M and Y, must be added to form mixed black. If it is big black, it can be made into: C=50 M=50 K= 100. Especially in PHOTOSHOP, when using it to bring the effect, we should pay attention to the black part is four-color black, otherwise there will be a horizontal bar in the black part on the screen, which will affect the overall effect. What are the requirements for image storage of inkjet and photo files?
It is best to store ink-jet and photo images in TIF format, but for the convenience of transmission, JPEG format can be stored (the quality must be above 8). Files in Coreldraw, Freehand and Illustrator formats must convert all text into curves. /view/6ac 43 13239680 1 1ca 3009 1 F3 . html