The first step of the construction technology of plastic floor arc angle in kindergarten is the same as that of all sports floor materials, that is, to ensure that the site is free of dust and potholes, which is to sum up, it needs to be clean and tidy.

Then stick a texture sticker at the position where the arc angle needs to be designed, mix and stir the materials evenly, and apply from the primer. The process must be carried out according to the arc angle trajectory, and it will definitely be better if there is an arc construction process knife.

After the completion of the above two steps, Tianguan Sports reminded the kindergarten that the rounded corners of the plastic floor should be polished with sandpaper of about 120 mesh, and the process must be smooth, and then continue to be polished with sandpaper of about 150 mesh, and the rounded corners should be polished to the extreme smoothness.

The last step is relatively simple. Stick exquisite pattern stickers on relevant areas and directly apply relevant materials. After curing for a period of time, it can be accepted and put into use.