2. Then you will jump to your photo album and select the picture you want to adjust. This function can only be fine-tuned. If the picture is distorted, there is no way.
3. After selection, select Enhance in the bottom line of function options. This is the place to adjust the color intensity such as brightness, contrast and saturation of the picture.
4. Choose the sharpening of the triangle in the enhancement, and adjust the sharpened circle to the most appropriate clarity, not necessarily to the far right, otherwise there may be impurities.
5. After adjustment, click the tick in the lower right corner to adjust the clarity of the picture.
6. Click on the comparison in the upper right corner, and you will find that there will be a big gap between the front and back of the picture. After the adjustment, it is obvious that all the details are clearer.
Extended data:
Vibration will blur the image in the photo, even if the focus is very accurate, it will affect the clarity of the image.
There are generally two reasons for vibration: First, the camera vibrates, that is, when the shutter is pressed, the camera shakes due to unstable grip. The second is the motion of the subject, that is, at the moment when the lens shutter is opened, the subject is in motion, and the shutter time is not short enough to freeze the motion, so the image is blurred.
To prevent vibration, we must suit the remedy to the case and take measures from three aspects:
(1) Mount the camera on a tripod. If the tripod cannot be supported due to shooting conditions, a monopod can also be used.
(2) Shortening the shutter time (generally 1/250 seconds) can reduce the image jitter caused by camera vibration.
(3) adopt the correct way of holding. Without a tripod, the correct posture of the camera will directly affect the stability of the camera. There is only one way to overcome the subject dynamic blur, and that is to shorten the shutter time. As long as conditions permit, the shorter the shutter time, the better the effect.