The wireless microphone is equipped with a receiver, which is installed in the stereo without connecting wires. Just turn on the stereo and turn on the microphone switch.

Tools/Materials: Audio.

1, insert

Insert the receiver cable into the output hole on the receiver, just as if the microphone were connected to the air.

Step 2 plug in the power supply

The power cord plugs into the wireless receiver. Plug in the other end.

3. Battery installation

Install the battery of the microphone, pay attention to the positive and negative poles, with the small end facing the big end.

4. signal light

Turn on the power of the receiver and wireless cylinder. The signal light will show green.

5. Connection status

Turn on the switch and try to check the connection status. Just adjust the frequency of the microphone and set the corresponding frequency.