First, how to install the background wall rock slab?
1 first of all, make sure the wall is flat. When pasting, make sure that the previous decoration steps have been basically completed, and then clean up all the construction sites. The workbench is ready for pasting, such as mixing the adhesive according to the corresponding proportion, ready for use.
2. For the first installation, you can refer to the drawings to splice the rock slab on the ground, and then start splicing the rock slab on the wall. Brush the glue on the back of the cut rock slab with a brush, and pay attention to the surroundings to ensure the decoration quality.
The coated slate should be left standing for 5 minutes, and the construction can continue only after the glue penetrates into the slate. Brush a few rock slabs at a time, and then stick them in order.
3. Brush neutral transparent glue behind several mosaic mirrors. If the back is big, you can stick a few 2 mm thick cotton double-sided adhesive tapes on the back, and then carry out construction. A tube of glass glue can handle about 1 to 2 square meters. If there are metal parts, we can use hot melt adhesive for construction.
4. Refer to the mosaic and paste it as it was put together on the ground before. Pay attention to keep the gap between each piece at 0.5 to1mm. The gap is to avoid the deformation of the gap behind it due to temperature difference. The order of pasting is from top to bottom. Note that the bottom must be horizontal and the diagonal is usually 90 degrees.
5. Usually it can be completely dried in 24 hours after pasting, which is very firm. Sticking doesn't need a lot of technology, and ordinary people can achieve it.
The cutting of the switch hole needs an angle grinder, diamond cutting, and then slowly cutting the hole while watering. Don't use too much force when cutting in the early stage, just let the angle grinder not shake so as not to damage the glass edge, and assemble the TV directly with a glass drill.
Let me sum up: the above is the installation method of the background wall rock plate. As can be seen from the above article, the installation must be in accordance with the specifications and drawings, which can avoid many unnecessary troubles in construction, and I hope it will help everyone.