Ps: 1 Steps to put photos in beautiful frames. First, open the photo frame in ps, click the "Layer" command in the bar in the menu bar, and select "Copy Layer by" under "New"; Open the Window command in the menu bar and select Layers. In the drop-down bar, you can see two layers: "Layer 1" and "Background". 2. Pick a box.
Select the magic wand tool in the left toolbar, and click on the part of the photo frame to be hollowed out to create a selection (the part surrounded by dotted lines). If the selection is incomplete, hold down the shift key, use the magic wand tool to continue clicking to add the selection, and then press the delete key to delete the selection. Click "Select" in the menu bar, select "Feather" by 5 pixels, then click "Select" and select "Deselect".
At this time, you can see that the central part of "layer 1" in the layer panel has been hollowed out; 3. Open the baby picture, click the mobile tool in the left toolbar, hold down the left button, and drag the baby picture into the picture box. At this time, you can see that there is also a "layer 2" in the layer panel, which is the baby's picture.
At this time, the layer panel * * * has three layers, namely layer 2, layer 1 and background from top to bottom. 4. Place the mouse on layer 2 (baby's picture) in the layer panel, hold down the left mouse button and drag it down to layer 1 (completed photo frame), and you can see layer 60. At this time, the order of three layers is "1 layer", "2 layers" and "background"; 5. Maximize the picture window, then click the "Edit" command in the menu bar, select "Free Transform" in the drop-down bar, and drag the small square mark in the upper left corner (or upper right corner) of the transformation box with the mouse to adjust the baby's image until it matches the photo frame (hint: a, hold down the "shift" key at the same time to keep the height-width ratio of the baby's picture unchanged; B. If you can't see the transition box, drag the baby in the photo frame down with the mouse.
Press Enter (don't forget this step); 6. Click the "Layer" command in the menu bar, select "Plane Layer", and then click "Save As" in the "File" command to save in jpeg format. In this way, the work of adding a photo frame to the baby piece is completed.
(Tip: Be sure to use "Save As"). Don't save the rest when you turn it off, so that the photo frame can be reused. If you follow the above steps, there will be no problem.
Easier steps to put photos in photo frames and photo studios: 1. First open the photo frame picture in the photo studio file. 2. Select the magic wand tool in the left toolbar, click the part to be cut in the picture box to create a selection (the part surrounded by dotted lines), and then press the "delete" key to delete.
3. Open the baby picture, right-click the baby picture, select "Select All", then click the "Edit" command in the menu bar and click Copy. 4. Click the blank part of the picture frame, click the "Edit" command in the menu bar, and click Paste. Well, put the photos you have seen in the picture frame.
5. Maximize the picture window, then click the "Edit" command in the menu bar, select "Free Transform" in the drop-down bar, and drag the small square mark in the upper left corner (or upper right corner) of the transformation box with the mouse to adjust the baby's image until it matches the photo frame (hint: a, hold down the "shift" key at the same time to keep the height-width ratio of the baby's picture unchanged; B. If you can't see the transition box, drag the baby in the photo frame down with the mouse. Press Enter (don't forget this step); 6. Click Save As in the File command to save it in jpeg format.
In this way, the work of adding a photo frame to the baby piece is completed. (Tip: Be sure to use "Save As"). Don't save everything else in the closed state, so that the photo frame can be reused.
2. How does 2.PS put a picture in a box, and then delete the redundant parts around the picture, only
1, open the ps software first.
2. Then click and select the eraser head in the red box on the right in the new interface, and click the right mouse button to select "Eraser Tool". After adjustment, you can add pictures.
3. Then drag the picture to be modified in the new interface. For example, now we have to remove the red heart from the picture, leaving only two images. As shown in the figure.
4. Then in the new interface, use the eraser tool adjusted before to erase the "red heart".
5. Finally, in this page, select the eraser head and "Background Eraser Tool". At this time, change the background color of the whole picture and remove the red heart. The whole picture looks like a red heart that I have never seen before.
3. How to put a photo in the checkbox in PS?
PS The steps to put photos in the check box are as follows:
1, first open PS software to open two Psd image formats.
2. Activate one of the pictures as the current file, then click the move tool in the toolbox, and then drag the photo frame in this picture to another picture. When the pointer appears, release the left button and copy the photo frame to a picture.
3. Select the magic wand tool in the toolbox on the left, and then click in the center of the picture box to select the air conditioner in the middle.
4. Open another Psd format picture, press Ctrl+A to select all, then press Ctrl+c to copy, and copy the selected content to the clipboard.
5. Please activate another Psd format picture first, and then click the Edit and Paste command above to paste the content copied to the clipboard into the selected content.
6. Select the mobile tool on the left, and then drag the character image to the appropriate position in the picture. The effect after discharge is shown in the figure.
7. Drag Layer 2 to the bottom of Layer 1 in the Layers panel.
8. Double-click the layer 1 in the layer panel to pop up the layer style dialog box, click the projection option, set the distance to 10 pixel and the size to 10 pixel, and click OK after setting.
9. The effect is shown below. At this point, a photo was successfully placed in the check box.
4. How to put a picture outside the box in PS?
You can also use the pen tool or lasso tool magic wand tool. Select the window, then delete the window, and move the room layer to the sub-layer of the tree (the picture of the sub-layer of the tree should be enlarged by Ctrl+T).
I hope my answer can help you.
By the way, I just took a photo. Your photo cut the window open and the tree is behind it. Just follow the above steps.