The detail is to adjust the exposure of the histogram column slightly to the left (accurate exposure) and much to the left (underexposure), which can make the color look brighter.
Beautiful, relatively comfortable. Different from 1000C, 1000C often needs slight overexposure in order to achieve the effect of colorful outdoor lighting.
However, when the indoor light is poor, a little exposure will make the noise of 1000C too large, and the different lens diameters will make Z5C have better details, especially when
When the exposure is accurate or slightly insufficient (slightly insufficient can be almost perfectly corrected in the later stage, of course, this is only your own usage habit).
About white balance: Sony's white balance has always been my great appreciation. Although my operation of the camera is almost manual, even if I use it,
With the automatic function, Sony's white balance often makes me feel at ease. Z5C white balance correction is particularly convenient and can even be customized at any time.
Is a possible deviation. My experience is: when setting PP, set the white balance transition as the fastest, not as slow and smooth as the online reference.
Transition, I like to correct it in the fastest time, instead of slowly discovering the difference in balance and then correcting it in a hurry.
3 About contrast and color: The positioning of Z5C is a professional camera, and the manual setting in the early stage of shooting will make us get different desired effects. someone
It is wrong to say that Z5C is dim and foggy! According to my own experience of shooting only six scenes, it is safe to say that if you need gorgeous.
Color and large contrast (or sharpness), then please set the PP value, and the added value of the color series RGB reaches 2 or 3 (one thing needs to be reminded: for
I think it's better that R color is one level less than GB color, so as not to make red look too bright. If you use Kangneng to render later, then the level of RGB is better.
It is best not to increase the number by more than 2 (because the rendered result of Kangneng is more gorgeous than the original color). Z5C can be adjusted.
In the detailed information, there are 7 levels of adjustment for the different definition (sharpness) of the section, and in the commercial setting, it is recommended to adjust it to 3-5 or even more, which has been obtained.
Cater to customers' love. About automatic exposure conversion: This function is on 1000C camera, in order to achieve the color that customers like when the light is good.
, I often set it to+1, but after trying it out, I'd better not use this function. By contrast, Z5C and 1000C shot the same point, Z5C.
The brightness of the color is much better than 1000C.
4 About the gain: Generally speaking, I set the gain value at the maximum acceptable level of 6 (in fact, it is difficult for me to turn on the gain). Maximum increase of Z5C
The gain can reach 2 1, but at the cost of losing details and a lot of noise. The only principle is that if you can't have your cake and eat it, then I'll choose the most practical one.
Metaphorically, the most important picture that cannot be reproduced.
5 PP for shooting: It is strongly recommended that if you shoot ordinary commercial images for a long time (such as a 20-minute meeting or a 30-minute wedding), please
Use the setting PP that you think is feasible to avoid excessive workload in later adjustment. But if you shoot high-priced short film advertisements such as MV, your own experience.
It is to close PP and shoot directly in standard mode, leaving the rest of the work to the later stage, which has given more room for the later stage.
About the recording unit: I have always held a negative attitude towards the recording unit, but the use of Z5C changed my ridiculous view, and the card was finally positive.
Not duct tape. In view of my inexperience, the first shot of my Z5C was to record both the tape and the card, and then record the video in the card.
Editing, discovery and tape video editing are no different (but before helping others edit card video, fluency problems will occur more or less occasionally,
At the end of the video clip, there is a problem of audio loss of tens of seconds, and so on. ), which may be related to the fact that the video format shot by Z5C video recording unit itself is DV format (av
I) Yes. So, let's focus on the experience of Z5C shooting with CF card. Except for the first recording with a card and a tape at the same time, the next five times were filmed.
I only use my card to record. Compared with magnetic tape, the response ability of card recording is far better than that of magnetic tape. In the process of continuous shooting pause, each user uses
Anyone who records a tape knows that the operation of the tape often stops for a few tenths or even a second because it can't keep up, but I shot it on a Z5C card.
This problem has not been found in the world. I used a 200-speed CF, shooting in standard definition. But the Z5C card record also has one of the biggest shortcomings, that is
But if you want to start the camera immediately when you turn it off, you will find that the moment you want to shoot is gone when the Z5C can enter the cassette, because
The waiting time for shooting with a card is too long to record. So, please turn on your phone 1 minute before the foreseeable shooting, in the unpredictable shooting.
Please don't turn off your phone when shooting (this won't have any effect on the drum, as long as you only set the Z5C.
External shooting function). Then if you only shoot with a card, please prepare one or even two thick batteries, because in the eyes of a qualified photographer: wonderful not to be missed!
7 About the security of card video: My practice is to copy the video of CF card to one hard disk of the computer first, and then copy it to another hard disk through the hard disk.
Establish engineering documents, import all videos, and format CF card after everything is normal. I do all the formatting work on the computer, and there is nothing unusual (but remember not to let the virus
Invasion).