Method 1:

Overlap a ribbon to form a circle, then straighten one side of the ribbon around this circle, pick up the ribbon at the other end, rotate it around the previous ribbon, and then pass through the newly formed circle again. After passing through, tighten and adjust the size of the two circles to be the same.

Pick up the ribbon with both hands, stretch your thumb and forefinger to straighten the ribbon. Both hands rotate in different directions and overlap, and then the other hand grabs the ribbon and pulls it in the opposite direction. After straightening, adjust the length of the ribbon and the size of the circle.

Method 2:

1. First, wrap the ribbon in a small circle and repeat it for 5-6 times.

2. Then hold the middle of the ribbon tightly and cut it at a certain angle.

3. Overlap the cropped part in the middle.

4. Tie the prepared long ribbon in the middle, pull it out from the inside out, pull it out alternately up and down, left and right in the same way, and then finish.

Method 3:

1. First tie the ribbon in a knot, then press it in the middle by hand, and then wind the ribbon on the right into a circle.

2. Fold the left ribbon from the top, bypass the right ribbon ring, and then pass through the left ribbon ring.

3. Put the right ribbon ring on the left, and put the ribbon passing through the left ribbon ring on the right.

Method 4:

1. Cut three ribbons with decreasing length.

2. The ends of the three ribbons are stuck with double-sided tape, and the middle is stuck with double-sided tape and fixed.

3, according to the length from the middle, in turn, superimposed and pasted firmly.

4. Cut a short ribbon and fix it in the middle.

5. Stick a three-layer bow on the gift package.