1, required materials: the fabric of 2 pairs of socks or gloves depends on the size of slippers you want. The two puffs are about 3.5 cm wide and 30 cm long. 1 beam or button. Sewing machine, thread, scissors, ruler, pencil, needle.

2. Step: Lay the puffs flat, measure the length from the middle of the puffs to the heel, and measure the same length on the fabric of socks or gloves. Cut this piece of cloth and it will be used as the bottom of slippers. Place bundles or buttons on both sides of the fabric and measure the appropriate distance to ensure that they don't protrude too much. Sew puffs and cloth together with a sewing machine. Starting from the bottom, point the fluffy material towards the front of the fabric, and then sew it.

Then turn it over, face another piece of fabric, aim at the sewn part, and continue sewing. In the process of sewing, ensure that the fabric and pleats fit closely. If necessary, it can be sewn by hand with needle and thread. After sewing, flip the slippers and check whether the seam is flat. If necessary, it can be adjusted manually. Now you can wear slippers. If necessary, you can use sewing machine or hand needle to add extra decoration or details to the top of slippers.

Matters needing attention when weaving puff slippers;

1. When sewing with a sewing machine, be careful not to put your fingers under the needle to avoid injury.

2. After turning over the slippers, check whether the seams are flat. You can adjust them manually if necessary.

3. If buttons or other decorations are needed, be sure not to protrude too much, so as not to affect the wearing comfort.

4. After putting on slippers, if you need extra decoration or details, you can sew with sewing machine or hand needle.

5. Material selection: Choosing the right material is very important for the comfort and durability of slippers. It is recommended to use soft and breathable materials, such as cotton or silk, to ensure comfort and durability.

6. Size matching: measure the length and width of the feet before knitting to ensure that the size of slippers matches the size of the feet. Slippers that are too small will limit the movement of feet, while those that are too large will affect the wearing effect.

7. Detail handling: Pay attention to detail handling during sewing. For example, after sewing, the thread ends should be trimmed to ensure that the slippers are neat and beautiful. In addition, you can add some extra decorations or details to the edges of the slippers to increase the aesthetics.

8. Maintenance precautions: When wearing slippers, avoid walking on sharp objects to avoid damaging the slippers. In addition, if you need to clean slippers, it is recommended to use mild detergent and soft brush to clean them, and avoid using dryer or high-temperature iron to avoid damaging slippers.