1: The bottom of the camera should be as flat as possible and placed horizontally at the rear of the car (usually just enough to photograph the wedding car behind). 2. Press and hold the camera (as if it were fixed on the car) to prevent the camera and the car body from shaking. Principle: This function is to integrate the camera and the car as much as possible. In this way, when you feel the vibration of the car, the picture taken by the camera will not vibrate, because the camera and the car are integrated and the car is moving, so there is relatively no vibration. I am not a scientist, so I can't tell the truth. ) Well, I've told you the method now. If you don't believe me, you can try (shoot for 60 seconds) to collect it. Note: 1. The machine must be pressed steadily, and some cars will be uneven, so we must find a way. Some off-road vehicles, the body is too high, so the team can't get too close. This method can't be used for large bends above 90 degrees. This method is also not suitable for mountainous terrain and uneven dirt roads. Suitable for expressway and urban areas. I still feel the picture shaking when I shoot at 5: 00. Make bold moves and go back to the collection. Please visit:/article-6218257-1.html.