Materials: cardboard, scissors, glue, pencil, ruler, watercolor pen.
Steps:
1, draw a picture first. Similar to making a paper box, draw all the faces first. Comprise two sides of a vehicle body, a roof and a vehicle bottom. It's best to draw with a pencil and erase it with an eraser after cutting, so that there will be no shadow in the watercolor painting behind. It's easier to draw wheels with coins.
2. tailor. Cut it with scissors according to the lines drawn on it. Note: just cut some lines, not too much. Other parts are folded in lines.
3. paste. Paste the corresponding location. What's more troublesome here is the front of the car. Because the front part is uneven and radian, it needs to be arched and cut the pasting part into multiple pieces, so that the pasting has radian. The top of the other half is slightly curled with a pen, and the radian is easy to do.
4. Roll a cylinder with white paper to make a chimney, cut the bottom into pieces and paste.
5. Draw the outline with a watercolor pen. It is basically the same as the outline drawn before.
6, color, draw what you like, and it's done.
Second, the practice of DIY toy train with sanitary paper core
Materials: sanitary paper core, glue, colored cardboard, sticker, stapler, watercolor pigment, brush, cotton, paper clip, triangular ruler, etc.
Steps:
1, use watercolor pigment to paint the used sanitary paper cores with different colors. After painting, put it aside to dry.
2. Cut out round wheels with black cardboard and stick them on both sides of the paper core of each car with glue. Each car needs four wheels.
3. Draw the window on the sticker with a black pen, cut it out and stick it directly on both sides of the paper core.
Then we make motorcycles separately. The locomotive needs a complete paper core and a half paper core, and they are fixed together with a stapler. Then continue to be like a carriage, with wheels attached to both sides of the locomotive.
5. A window is added to the semi-paper core above the locomotive, and the front and rear wheels are connected by two popsicles.
6. Cut the cardboard into cigarettes and stick the chimney in front of the locomotive with glue. Outside the chimney, insert a roll of cotton instead of fireworks on the train.
7. Chains woven with paper clips can be strung between carriages and between carriages and locomotives.
Third, the method of making small train toys by hand with medicine bottles
Materials: one big five small ***6 medicine bottles, sponge paper, toothpicks, double-sided tape, scissors, ballpoint pen.
Steps:
1. Cut long and thin strips from blue sponge paper and roll them into tight rolls. * * * Need 10 wheels.
2. Connect the wheels with toothpicks.
3. Cut a rectangle from the blue sponge paper, which is slightly larger than the cross section of the medicine bottle and stick it on the medicine bottle.
4. Paste the finished wheel under the sponge paper. Then take out the toothpick, cut it short, and wrap it tightly at the end of the incision to make a nail.
5. Overlap the sponge paper under the medicine bottle, then insert the nail, and the train car will be connected.
6. Finally, take out the yellow sponge paper, make chimneys and signs, and make cute little trains!