How to operate the royal salute wedding?
Because we can't go by car, in this case, we need a big car, and the big car is also dangerous, so we all transport it separately. Then the first step of the royal salute wedding operation is assembly, and then the oxygen pipe and liquefied gas pipe are connected to each salute through the console. During installation, ensure that the oxygen pipe and liquefied gas inlet pipe of each salute correspond to the console.
The second step is to connect the wires. Also, note that the console corresponds to each line. After the connection is completed, check again to avoid missing or wrong connection.
The third step, after the connection part is completed, you can start the preparation work, and at the same time, this step should be done in strict accordance with the instructions to prevent danger. Generally, the pressure of oxygen inlet is 0.2 to 0.3mpa, so it is good that the pressure of liquefied gas is normal.
Step 4: After all the above steps are correct, turn on the power supply and press the air intake control key two or three times at the same time. This is because the air intake of the royal salute wedding is relatively long, and the first air intake takes a long time, so press the air intake button two or three times to make the air at the air intake fuller, and it will look good when sprayed out.
Step five, do an inspection and adjust the direction and position at the same time. Don't point the gun at people, or it will be dangerous. There is also a fixed method for the royal salute wedding. Don't lean or deviate from the direction because of the impact.
The sixth step is to wait for the opportunity, make a move and go out. Don't worry about not going out. Check whether oxygen or liquefied gas is missing, whether the oxygen meter is normal, whether the liquefied gas pressure reducing valve is normal and whether the two solenoid valves are normal.
Do you really want to have a try when you know how to operate it? I suggest that if you are not a professional, you should read the instructions carefully and don't practice easily without theoretical knowledge. What I said above is also for reference, but it depends on the operating instructions of the royal salute wedding discharge. What parts of the wedding can use fireworks? Come and have a look with me.
1. wedding ceremony
This is a very important moment, so choosing fireworks is also great. Of course, a salute will be more appropriate, indicating that it is thriving. The royal salute is good for the wedding.
2. Before the wedding
After the guests arrive, they need to set off fireworks to indicate the start of the banquet, and tell the guests that the ceremony has begun, so that everyone can start looking for a place to sit down.
3. Newcomers come out
This is not suitable for salute. Many people choose ribbons or cold fireworks. Because it is indoors, we should pay more attention to safety. I don't think we should point these at people when using them to prevent accidents.
My conclusion: Nothing is absolutely safe, so everyone must pay attention to protect themselves and take good safety measures. And everyone should be familiar with the operation method of royal salute wedding, safety first. I talked about his operation method in the article, hoping to help everyone.