Ribbon, woven with warp and weft. The quality can be improved by doubling the weft or warp, which is the satin structure. By doubling the warp, the texture of the cloth label becomes soft and smooth. However, after the warp yarn is doubled, the density is too high, so the weft yarn can't show the pattern well, and the color of the bottom surface can't be flexible, so it can only show certain color requirements through the later process.

Basic introduction Chinese name: ribbon model: NK-CJQ 1526A power supply: AC220V-240V/50-60Hz power: 1500W ribbon introduction, ribbon series products, ultrasonic ribbon cutting machine, working principle, technical parameters, characteristics, working environment, related knowledge and ribbon introduction. The quality can be improved by doubling the weft or warp, which is the satin structure. By doubling the warp, the texture of the cloth label becomes soft and smooth. However, after the warp yarn is doubled, the density is too high, so the weft yarn can't show the pattern well, and the color of the bottom surface can't be flexible, so it can only show certain color requirements through the later process. Whether a machine is set to plain or satin is generally relatively fixed. Generally, the width of trimmed satin does not exceed 10.8cm, and the width of selvage does not exceed 5.0cm Ribbon series products mainly include the following categories: 1. Polyester tape 2. Nylon ribbon 3. Ear Ribbon Picot Ribbon 4. Velvet ribbon. Double-sided ribbon Bon 6。 Stretch velvet 7. Special velvet 8. Snow yarn 9. Special snow yarn 10. Checked ribbon 1 1. Embroidered ribbon 65. 438+02. Polyester belt 13. Silk ribbon ultrasonic Ribbon cutting machine is the working principle of real velvet ribbon. Ultrasonic Ribbon cutting machine combines ultrasonic welding technology with traditional cutting. When the ultrasonic generator works, the ultrasonic energy is transmitted to the welding head through the ultrasonic transducer and violently vibrates and rubs against the die, thus achieving the cutting effect and making the cut product more beautiful, firm and efficient. Technical parameter frequency of ultrasonic tape cutter: 20KHZ pressure: 0.6-0.8Mps weight: 125kg size: 1 200mm× 550mm×1350mm features:1. Using ultrasonic cutting, the incision is complete and beautiful, and the trimming is neat, smooth, burr-free and loose. 2. This machine adopts PLC console, automatic feeding, computer counting, high precision, fast speed, simple, fast and efficient length adjustment, and can cut multiple pieces at the same time; Sample 3 of ultrasonic tape cutter. It is mostly used for cutting gift belts, strip nylon belts and strip ribbons in the shapes of straight knives, oblique knives and swallowtails. South Lijin ultrasonic shearing machine is widely used in packaging, gift, ribbon shearing and other industries, and its unparalleled shearing effect is deeply loved by our customers. The working environment is 1. The power supply must be AC220-240V and safely grounded. 2. Place the machine in a dry, ventilated and well-lit place. 3. Do not know the corrosive products where the machine is placed. 1. The principle of ultrasonic tape cutter? Through the high-speed vibration and friction of 20KHZ, the cutting surface reaches high temperature, and then returns to low temperature after cutting. Therefore, in the process of tape cutting, ultrasonic wave overcomes the phenomena of sticking knife, blackening, stinking and burning in the traditional hot cutting process, and also overcomes the phenomena of burrs and hairiness in the cold and hot process. The ribbon cut by ultrasonic ribbon cutting machine has beautiful seal, and it is the first choice equipment for making high-grade products. 2. What's the difference between ultrasonic belt cutter and ultrasonic belt punching? Ultrasonic Tape Cutter Die Ultrasonic Tape Cutter is only suitable for cutting ribbons and ribbons. It is usually used for cutting straight knives, but sometimes it also cuts bevel, trapezoid and parallelogram lines. Southern Force ultrasonic punching machine is programmed by computer to finish continuous punching and ribbon cutting, which can not only cut ribbons with complex shapes, but also adjust the distance of each hole at will. Belt puncher is especially suitable for the production and processing of leather and other ribbons with complex shapes. (1) is the reason of the tool itself. Ultrasonic tape cutting is accomplished by high-speed friction and pressure exceeding 20KHZ, and ultrasonic itself can grind the tool. The ultrasonic steel die is also made of high-quality alloy steel. After heat treatment, the initial hardness can reach above 60. Due to the continuous collision between the tool and the ultrasonic steel die, the quality of the tool is unqualified. Therefore, ultrasonic knives must use imported high-quality tool steel, and the hardness after heat treatment must reach 1, which is higher than that of ultrasonic steel molds. Ultrasonic belt cutting is accomplished by high-speed friction and knife pressure. The knife of ultrasonic tape cutter is generally at an acute angle less than 60. In the process of debugging, the limit of the knife must be adjusted accurately. The knife is not in complete contact with the ultrasonic steel die, and it is broken by ultrasonic vibration and friction when it is pressurized, otherwise the knife of the ultrasonic tape cutting machine will soon wear under the impact of high pressure, which will also affect the life of the ultrasonic die.