How about a blister light box?
First, the introduction of plastic light boxes
The blister light box is made of acrylic material, which is relatively stable. The produced light box has good light transmission effect and high definition. The blister light box is made by the processing technology of three-dimensional luminous characters. Therefore, the blister light box has a good use effect and is widely used in the advertising industry.
Second, the coloring method of blister light box
The colors of plastic light boxes we see in our lives are always colorful. How did they achieve this effect? Mainly because we used different coloring methods for reprocessing when making, as follows:
1, screen printing. This is one of the main ways to color the blister light box.
It is also commonly used when coloring light boxes. Screen printing requires very high ink quality. Use good quality ink for decoration, to avoid scratching the blister light box when baking at high temperature, and to further prevent the light box from fading in use. 2. movies. This is another way to color the blister light box. This film coloring method is only suitable for simple light boxes. In order to improve the coloring effect, it is suggested that you must buy those high-quality films when coloring the blister light box to prolong the service life of the light box.
Third, the characteristics of blister light box
1, eye-catching: originality is always the goal and motivation of the advertising industry. Today, with the proliferation of print advertisements, the public needs a brand-new advertising expression that can relax their eyes, and plastic light boxes have emerged. The advertisement of blister light box breaks through the traditional two-dimensional expression, uses three-dimensional modeling to stimulate people's spatial imagination, and has a strong sense of three-dimensional modeling. In addition, the light of the blister light box is very soft, giving people a more intimate and comfortable feeling.
2, high cost performance: both day and night effects,
More ornamental value than ordinary light boxes. 3. Environmental protection: Because acrylic material can be completely recycled, it is regarded as a green advertising form facing 2 1 century.
Four. Application field of blister light box
1, advertising display category, such as: light box, signboard, signboard, display stand, ball cover, signboard, etc.
2. Lighting, such as fluorescent lamp covers and lampshades of various shapes used for environmental purification equipment.
3. Civil categories, such as bathroom equipment, dressing tables, photo frames, merchandise racks, gifts, souvenirs, cool chairs, candy boxes, information racks, food covers, etc.
4, medical category, such as baby incubators, kits, thermostats, operating cabinets.
5. Buildings, such as windows, soundproof door walls, lampshades, solar collectors and telephone booths.
6. Industrial products, such as instrument panels, machine shields and flowmeters.
Verb (abbreviation of verb) blister light box specifications and dimensions
There is no fixed size for the specifications of the blister light box, and the specifications of the blister light box can be formulated according to the needs of merchants.
And the thickness can be set between 5- 10 cm. The length and width of the blister light box can be any size, such as1180 * 841mm, 84 1*594mm, 594*420mm, 420*297mm, 297 * 21. Installation method of blister light box
1. When installing the blister light box, the operator must wear pure cotton white gloves. Because hand sweat contains oil, salt, acid, alkali and other components, it is corrosive, and sticking to stainless steel will slowly corrode the surface of stainless steel.
Make the stainless steel surface slowly fade and lose its original aesthetic feeling.
2. When installing the outer frame of the blister light box, be sure to handle it gently to avoid collision and deformation, and lay the outer frame flat on the ground.
3. The size of the blister light box must be the same as that of the light guide plate, neither too big nor too small, so as not to affect the display effect and the heat inside the light box.
4. When installing the outer frame of the blister light box, handle it gently, lift it horizontally and hang it horizontally, then close the lower part of the blister light box and fix it with the hexagon socket head screws.
5. Then check whether the power cord on the upper part of the blister light box is in the power access slot, and if not, correct it.
6. Plug in the power plug and turn on the main power switch to see if the light is normal. If there is a phenomenon that one side is lit and the other side is not lit, please disconnect the power supply and unplug it first, and check whether the lamp cap wire is loose and the lamp tube is not in place; Whether the input and output lines of ballast are loose, etc.
7. If the whole blister light box is not lit, please check whether the leakage protector is closed, whether the wire connector in the plug is loose, and whether the input and output connectors of the suppressor are loose.
8. If the leakage protector can't be turned on, please check whether the power cord enters and whether the branch circuit under the ballast and lamp tube leaks electricity.
If one side lights up and the other side doesn't, please disconnect the power supply first, unplug the plug and check whether the wire of the lamp holder is loose. Whether the input and output lines of ballast are loose, etc. 7. If the whole blister light box is not lit, please check whether the leakage protector is closed, whether the wire connector in the plug is loose, and whether the input and output connectors of the suppressor are loose.
8. If the leakage protector can't be turned on, please check whether the power cord enters and whether the branch circuit under the ballast and lamp tube leaks electricity.