1. Wipe it with a paper towel dipped in alcohol (preferably industrial alcohol, medical or non-medical), and then wipe it for a few times.
2. Use acetone. The method is as above. The dosage is small and thorough, and the best thing is that it can remove these residual gums very quickly and easily, which is better than spraying.
3. Use nail polish remover. Usage is the same as alcohol acetone. The effect is also very good. Nail polish remover doesn't require quality, it's good and ordinary, as long as it can wash off nail polish.
4. Use hand cream. Tear off the surface print first, then squeeze some hand cream on it and rub it slowly with your thumb. After rubbing for a period of time, all the rubber residue can be wiped off. Take your time. Hand cream belongs to grease and its properties are incompatible with rubber. Glue removal is to take advantage of this feature.
5. Use banana oil. It is an industrial paint remover, and it is also easy to buy (where there is paint, there is it).
Glue cleaning method for sticking balloons in wedding rooms;
1, alcohol cleaning method
Dip enough 95% alcohol solution into something like a soft cloth, and then gently wipe it on the adhesive, which is easy to soften and fall off.
2, gasoline removal method
Dip a little gasoline into the adhesive with a soft cloth and other materials. At this time, it should be noted that gasoline has a "dissolving" effect on a certain plastic or paint, so be careful when using it to avoid unnecessary trouble. Before use, you can gently rub it in an unimportant place to observe the change, and use it if there is no problem.
3, hand cream removal method
Hand cream contains a large amount of solvent (generally above 70%), and water contains a certain amount of surfactant, which has good wetting, penetrating and dissolving ability and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of removal. Of course, there are some similar products, such as face cream, facial cleanser and detergent. , also has the same effect.
4. Disassembly method of hair dryer
Blow with a hair dryer to soften the adhesive. When the adhesion of double-sided tape becomes weak, it can be removed more casually.