The design of the pressurized jet printer is also unique. Pressurized spray adopts the principle of variable runoff pressurization, imported 304 stainless steel material, which is very suitable for health. At the same time, the pressure spraying adopts laser drilling technology, with the diameter of air inlet 0.8, the diameter of air outlet 0.2 and the number of holes 105-2 10, which improves the shower experience. When the water sprayed by the pressurized flower passes through the hole, the water flow will be rapidly pressurized. When the tap water pressure is high, the sprayed water will not exert great pressure on the pores of the skin with a pore size of 0.2 and above 100, but will disperse when passing through the nozzle and naturally soften, so that users can fully feel the pleasure of bathing.
The internal design of the booster with good quality is also very good. The pressurized spray we use mainly adopts aerodynamic technology, turbocharging technology, turbocharging technology and this pressurized spray faucet. Through the design of internal water channel and the setting of vortex supercharger, the mixing degree of water spraying power and foam in shower is improved, and the bathing effect is improved. The design of this pressurized spray makes the water flow more stable and the bathing experience more comfortable.
It is also important to choose a guaranteed pressurized spray brand. At present, the brands of pressurized spray with good quality are Jiumu, Hanmai and Kohler. This pressurized spray is further guaranteed in the design and service life of pressurized flower roots.
When buying steam embossing, it's best to try it first, spray the oblique water of steam embossing to see if there is water and whether the steaming effect of steam embossing spraying is obvious enough. The autoclaving effect of steam embossing spraying is not obvious and the quality is not good. Secondly, it depends on the nozzle design of the booster nozzle to confirm whether the inside of the booster nozzle is clean enough, and then check the coating and valve core design of the booster nozzle. Finally, we should pay attention to the comfort of pressurized flowers. This also requires special attention. Because the flower spray should have a comfortable bathing experience, when you look at the water sprayed by the flower spray, you don't know whether the water sprayed by the flower spray is uniform, whether the pressure sprayed by the flower spray is comfortable enough, and whether there is a tingling sensation.