First, how to replace the spotlight when it is broken?
Before replacing the spotlight, turn off the power supply first, and then pry the edge of the spotlight tube with a nail. When the spotlight tube is turned on, two wire spring clips can be seen. After removing the wire spring clip, you can take out the lamp cup and replace it with a new one. The wattage and voltage of the new lamp cup should be the same as that of the old lamp cup. Finally, the steel wire spring clip and the lamp tube can be put back to their original positions.
Second, the spotlight installation matters needing attention
1, when installing spotlights, you should determine the installation position of spotlights according to your actual situation, and consider the distance between spotlights, not too close or too far. If the space in the installation area of spotlights is not large, the number of spotlights should not be too much, so as to improve the overall installation effect of spotlights.
2. When installing spotlights, you need to check the products in advance to see if they are in good condition. If the spotlights are found to be damaged by non-human, you should contact the merchants to replace them in time, and turn off the power switch before installing the spotlights to avoid electric shock accidents during installation.
3. In the process of installing spotlights, don't install spotlights in places with high temperature or close to heat sources, otherwise the service life of spotlights will be shortened. The installation parts of spotlights must be waterproof, especially in the bathroom, because the environment in the bathroom is humid.
Summary: How to replace the broken spotlights is here. When installing spotlights, we must strictly control the number of spotlights, because too many spotlights will cause light pollution, high power consumption and potential safety hazards. If you want to know more about decoration, you can pay attention to Qijia. com。