Lamps and lanterns are essential in the renovation of new houses. It not only plays the role of home lighting, but also is an important decoration at home. The lamp is easy to break down when used for a long time. Usually, we just need to replace its lamp. Because the lamp is charged, you should master the correct installation skills when installing the lamp. How to install the lamps? What should I pay attention to when installing lights? Let's take these questions and learn how to install lamps together!

How to install the lamp tube

1. Before installation, be sure to turn off the power and prepare the materials to be installed. Because the lamp tube is clamped by the spring piece, we should pull the spring piece apart and pull it down a little when installing, and then slowly clamp the lamp tube into the spring piece. If it is to replace a new lamp, we need to take the old lamp out of the spring plate first, then unplug the ballast, remove the old lamp and replace it with a new one.

What should I pay attention to when installing the lamp?

1. Be sure to turn off the power supply during installation to avoid electric shock and safety accidents during installation. The installation of the lamp tube will be directly affected by the ambient temperature, and the lamp tube itself has various heating elements. Therefore, it is suggested that before installing the lamp, we must pay more attention to the installation environment of the lamp and install it in a good environment, so as to avoid the failure of heating elements in the lamp due to poor heat dissipation effect or reduce the service life of energy-saving lamps.

Generally speaking, a high-power lamp will be bigger and heavier. Therefore, when installing, we must pay close attention to the installation of its lamp holder and lampshade. We need to see if it can support high-power energy-saving lamps first. If the lamp holder or other parts are found loose during the installation of the lamp tube, we must take effective replacement or maintenance measures immediately to ensure the safe use in the future.

3. Because different lamps have different structures, we need to read their installation instructions first, carefully check the signs of lamps, and install them according to the instructions and explanations. When cleaning lamps at ordinary times, be careful not to change the structure of lamps or replace the parts of lamps. After cleaning and maintenance, install the lamps as they are, and don't miss or misplace the parts of the lamps, so as not to affect the normal use of the lamps.

Bian Xiao's words: The above is what Bian Xiao explained to you about how to install lamps. I hope I can give you some reference!