Extended data
The official seal refers to the seal used by the government, companies and other organizations. China has a perfect judicial management system for the management of official seals, and any private engraving is illegal and criminal. For seals forged without legal subject behavior, it shall be punished as the crime of forging subject.
It is best to use copper, stainless steel, ox horn or wood as the official seal, because when opening a company account in a bank, both red glue and photosensitive seal are soft materials, and the bank will not put them on record, so it is impossible to complete the printing procedures. Because the Ministry of Public Security has not made uniform provisions on the engraving procedure, the provisions on the engraving procedure vary from place to place. According to the different types of seals, the procedures are different.
The size of the official seal of general enterprises and limited companies is 40x40mm, the size of the official seal of self-employed individuals is 38x38mm, and the width of the round edge is1mm. The five-pointed star central journal and the enterprise name are circulated from left to right, or the names are circulated from left to right in the front section, and arranged horizontally from left to right in the back section. The seal text uses simplified Song style. The official seal refers to the seal used by organs, organizations, enterprises and institutions. Because the Ministry of Public Security has not made uniform provisions on the engraving procedure, the provisions on the engraving procedure vary from place to place. The specifications are as follows: 1. Both the party and the government are cyclical. The sickle and hammer are printed in the middle, with a diameter of 4.2cm and a width of 0. 1cm. The sickle and hammer are printed with the name of the party organization, circulating from left to right, and the seal is in simplified Chinese characters. 2. All trade union branches are circular. The diameter is 4.2cm, the outside is double-sided, the outside is thick, the side width is 0. 1cm, the inside is thin, and the side width is 0.0 1cm. The upper arc is the unit name, circulating from left to right, and the seal uses simplified Chinese characters. 3. The official seals of state-owned enterprises and state-owned joint-stock enterprises (including company seals and department seals) are all circular, with a diameter of 4.2cm, a five-pointed star in the center, a star tip diameter of 1.4cm, and a round edge width of 0. 12cm. The name of the five-pointed star foreign language publishing unit circulates from left to right, or the front of the name circulates from left to right, and the back circulates from left to right. 4. The special seal shall be circular, with a blank center, a diameter of 4.0cm, and a width of 0. 1cm, with the upper arc as the unit name and circular lines from left to right. The contents of the special seal shall be placed horizontally at the bottom of the chapter, and simplified characters in Song Dynasty shall be used for printing. 5. The seals of departments, individuals and private enterprises belonging to other enterprises are circular, with a diameter of 3.8cm and a width of 0. 1cm. The five-pointed star is printed in the center, and the name of the enterprise approved in the business license is printed on the seal, circulating from left to right, and the printed words are simplified characters. 6. Special seal for industrial and commercial enterprise contract, regardless of economic components, circular, with a diameter of 5.8cm and a width of 0. 15cm. The name of the enterprise is printed in a circle from left to right, and the five-pointed star is not published in the center. The bank, bank account number, telephone number and enterprise address of the enterprise are arranged horizontally from top to bottom. If more than one special seal for the contract is engraved, the number shall be engraved at the lower end of the seal, and the font in simplified Song style shall be used for printing. 7. The seals of a limited liability company are all circular, with a diameter of 4.0cm, the special seals of the company and the seals of subordinate departments are 3.8cm in diameter, and the width of the round edge is 0. 1cm. The five-pointed star is published in the center, and the enterprise name of the five-pointed star circulates from left to right, or the front of the name circulates from left to right, and the back traverses from left to right. Simplified typeface is used for printing. 8. The seals of a company limited by shares are all circular, with a diameter of 4.2cm and a width of 0. 12cm. The diameter of the special seal and the seal of the company's subordinate departments is 4.0cm, and the width of the round edge is 0. 1cm. The five-pointed star is published in the central journal, and the enterprise name of the five-pointed star circulates from left to right, or the name circulates from left to right in the front section and horizontally from left to right in the back section. The seal is used. 9. The seal specifications of Sino-foreign joint ventures (cooperative enterprises) and wholly foreign-owned enterprises are oval, with a horizontal diameter of 4.5cm and a vertical diameter of 3.0cm. The five-pointed star is not published in the center (the enterprise logo is required to be engraved), and the enterprise name circulates from left to right or horizontally from left to right. According to the requirements of the seal unit, steel seal and Chinese and English seal can be engraved. 10, the seal of local social organization is circular, with a diameter of 4.2cm, with a pentagram in the center and the name of social organization on the outside of the pentagram, circulating from left to right. The seal uses simplified Chinese characters 1 1. The seals of the school and its subordinate functional institutions are all round, the diameter of the seal of the university is 4.2cm, and the center magazine is a five-pointed star or school emblem. The seal diameter of its functional organization is 4.0cm, and the name of the school circulates from left to right. The names of functional institutions are arranged horizontally from left to right perpendicular to the school name, and the middle part is blank. The diameter of the school seal below the medium level (including the medium level) is 4.0cm, and the school name circulates from left to right. The names of functional organizations are arranged from left to right. Center blank, various school seals, diameter 3.6cm 12. The special invoice seal is oval in shape, with a major axis of 40mm and a minor axis of 30mm, a side width of 1mm and a red color. Special seal for invoice: taxpayer identification number of Central Daily; The names of taxpayers in foreign periodicals are circulated from left to right. If there are too many words in the name, you can use standardized abbreviations. The words "Special Seal for Invoice" will be published in the next issue. Taxpayers who use more than one special invoice seal should print the serial number directly below each special invoice seal, such as "(1), (2)". The Chinese characters printed on the special invoice seal shall be simplified characters, and the font shall be imitation of Song Dynasty; The words "Special Invoice Seal" are 4.6 mm high and 3 mm wide; The taxpayer's name is 4.2mm high and the width is determined according to the number of words in the name; The taxpayer identification number is Arial, with a word height of 3.7mm and a word width of1.3 mm. ..