What is touching the corner?
The contact angle in the figure is generally like this. Align the tiles at the joints of the external corners of the tiles. For the special-shaped tiles in the picture, the contact angle is still very beautiful.
What is the yang angle line?
Yang angle line, also called Yang angle line closing strip or Yang angle line, is a decorative line used for 90-degree convex corner wrapping of ceramic tiles. It takes the bottom plate as the surface and makes a 90-degree fan-shaped cambered surface on one side, which is made of PVC, aluminum alloy and stainless steel. There are anti-slip teeth or holes on the bottom plate, which is convenient for full combination with walls and tiles. The edge of the fan-shaped cambered surface is limited to the hypotenuse, which is used to define the installation position of tiles or stones. At present, PVC corner wire is the most widely used in the market, but I recommend stainless steel corner wire to you because it is relatively more durable and healthier.
3. Chamfering method
The traditional method is to grind two tiles into a 45-degree angle, and then paste the tiles diagonally. This method is economical and practical, and the decoration effect is good, and the daily maintenance and cleaning work is also very convenient. The overall visual effect is an external angle of 90 degrees.
If workers chamfer on site, it is easy to have irregularities, which will bring great trouble to future use. If they expand when heated and contract when cooled, they will break. Vitrified bricks are used at home, so it is difficult to chamfer on site.
The contact angle in the figure is generally like this. Align the tiles at the joints of the external corners of the tiles. For the special-shaped tiles in the picture, the contact angle is still very beautiful.
5. What about the outer corner of the wall?
If the external angle of the wall is not handled properly, it will not only affect the aesthetic degree of home decoration, but also lead to the unsmooth placement of furniture and decorations, which will directly affect daily life.
Therefore, everyone should pay enough attention to the treatment of the external corner of the wall in the decoration. The specific method is as follows:
(1) batch ash treatment. Grey was approved to make it easier to play with the line. After doing a good job of plastering at the grass-roots level, clean up the periphery of the external corner of the wall to ensure that the elastic line is not affected by other things.
(2) elastic thread. In fact, bouncing the line is to put down the line pendant at the yang corner of the wall. The vertical lines and parallel lines made at this time are the "standard lines of Yin and Yang angles".
(3) Brush putty. When playing with putty, straighten the corners first, and then scrape them in parallel, so that the corners of the wall will be square.
(4) Protective treatment. Because the external corner of the wall protrudes outward, it is easy to be damaged, so everyone can make a smooth treatment, or directly put on the corner protector to achieve the protection effect.