Fault

Cause

Treatment method

Belt deviation

1. The belt itself is skewed

Replace some belts

2. The tail tensioning device and slide rail are deformed and derailed

Adjust and reshape

3. The frame is not straight (including the middle Frame)

Calibrate based on the center line

4. The adjusting wheel, groove, and return wheel bracket are not correct

Adjustment groove, return wheel bracket, and adjustment wheel Wheel inspection

5. The reversing drum is not straight

Adjust the level and center position of the reversing drum

6. There are debris on various drums and the glue joints are not straight.

Repair the cleaner to clean the sticky coal and re-inspect the rubber joints

7. The material is unbalanced and the coal guide chute is offset

Improve the position of the feed chute

8. The blanking point is incorrect

Adjust the blanking point

9. The coal retaining belt is worn on one side

Replace the coal retaining belt< /p>