A thousand fingers like sunshine or warm and dry semi-cloudy environment, and they need a certain degree of air humidity to resist drought and water accumulation. Avoid exposure to the hot sun in summer, and pay attention to good ventilation. In winter, it is safe to spend the winter in Ningbo, with sufficient sunlight and dry indoor soil. Pot soil should be loose and fertile, with good air permeability and certain granularity.
Introduction of propagation methods of 2000 strains of bergamot
1. Leaf cutting: Generally, in the growing season, the mature leaves at the lower part of the plant can be gently broken and spread flat on wet soil. Generally, it takes about 2 weeks to take root, and the soil can be kept moist after rooting.
2. Sowing: Chihuahua seeds can be sown in the growing season (autumn is the best, followed by spring), and the sowing temperature is generally controlled at 18 ~ 23 degrees. Sowing soil can be peat+vermiculite+perlite. After the seeds are soaked in insecticidal and bactericidal water, they are laid flat on the soil surface and covered with plastic film (ventilated for 2 hours every day). Generally, they germinate for about a week, and then they are taken out after germination is neat.
3. Plant division: One thousand fingered citron plants can be propagated by plant division. Small plants around the plants (or the upper branches of plants that grow excessively) can be cut off with a sharp knife in the growing season, dried for one week, planted in moist soil, and watered normally one week later.
Introduction of cultivation methods of three thousand bergamot
1, temperature: The suitable temperature for Chiffodil growth is generally 18 ~ 25 degrees, and not less than 5 degrees in winter.
2. Moisture: The water of a thousand bergamot should be completely dried (it is very drought-tolerant, so water it as little as possible), and water it 1 ~ 2 times a month, not too much, otherwise the roots will rot.
3. Soil: It is most convenient to use fleshy special soil for Chihuahua breeding, such as peat+gravel+perlite.
4, lighting: a thousand bergamot likes light, it can be full of sunshine, and it will generally block some shade in summer.
5. Fertilization: Fertilization by bergamot is generally applied once a month during the growing season. Thin fertilizer can be applied frequently or with water.
Breeding method of chiba orchid
Chiba orchid, also known as chiba grass, Chiba green algae and Dictyophora, is a perennial evergreen vine. Plants grow prostrate or pendulous, and slender stems are reddish brown. Leaflets alternate, and the leaves are heart-shaped or round. Chiba grassland, produced in New Zealand, has a strong habit and likes warm and humid environment. It can grow normally in sunny and semi-shady places and has strong cold tolerance. It can withstand the low temperature of about 0℃ in winter, but it is necessary to avoid ice and snow falling directly on plants and reduce watering. If the roots are soaked with water, they will rot and damage plants. Keep the soil and air moist during the growth period and avoid being too dry, otherwise the leaves will dry up and fall off. Apply decomposed dilute liquid fertilizer or special fertilizer for foliage plants once a month.
In summer, pay attention to good ventilation and proper shading to prevent sun exposure. Change the basin once a year in spring, and the basin soil should be loose and fertile sand with good drainage and ventilation. When sprouting, the plant is pruned once, and the long and dense branches and some old branches are cut off, and many new branches will grow at its nodes, making the plant fuller. Due to its rapid growth, chiba grass should be reshaped frequently in cultivation, and the branches that affect the plant shape should be cut off in time to keep beautiful.
Chiba grass can be propagated by changing pots and dividing plants, cutting in the growing season, or using branches cut during spring pruning. Cutting time should avoid high temperature in summer and cold season in winter, and keep the soil and air moist after cutting, which is easy to take root.
How to raise Huang Li? What are the feeding methods and precautions in the yellow calendar?
Introduction of growth habit of 1 Castanea mollissima
Yellow pear is a succulent plant dormant in summer, but its dormancy period is not obvious, and it likes light but is not tolerant to shade. In the case of insufficient light, it is easy to make the plant shape loose, the leaves become longer, the spacing between leaves increases, the color is not yellow, and it is in a virtual long state. In the case of sufficient light, the plant is compact and the color will be yellow like jelly, which is a veritable yellow beauty. Yellow pear is easy to produce lateral buds, not only between the axils at the top of the plant, but also on the semi-lignified stems of deciduous leaves.
2. Introduction of reproductive methods in the Yellow Calendar.
The propagation of yellow pear mainly depends on plant lateral buds, leaf cutting and beheading. After beheading, the remaining stems and roots will grow new buds to continue the offspring, and it is very easy to grow lateral buds, and the survival rate is relatively high. Leaf cutting is the first choice for greenhouse propagation, and a large number of seedlings can be obtained. Spring is the season when lateral buds germinate, and at this time, reproduction and growth are the fastest. Huang Lican can reproduce all year round. When small leaves fall on the surface or are inserted into the soil, independent plants can grow.
3 Introduction of breeding methods and precautions of yellow pear
1. soil: loose soil with good air permeability and water permeability is required, and mixed soil of peat soil, culture soil and coarse sand can be selected for cultivation. Yellow soil is a mixture of peat and cinder in a ratio of 3:7.
2, lighting: yellow light, not tolerant to shade, slightly tolerant to semi-shade, but semi-shade is easy to grow white for a long time, and the leaves are loose. Spring and autumn is the growing period, and it can always be sunny. Mild dormancy in summer. But shading measures should be taken in summer.
3. Temperature: The optimum temperature for growth is about 15 ~ 28℃, and plants above 30℃ in summer or below 5℃ in winter gradually enter dormancy. The overwintering temperature should be kept above 5℃, and good ventilation is beneficial to growth.
4, watering: watering is to dry before watering, not watering. Afraid of long-term rain, afraid of continuous watering and waterlogging Water 4-5 times a month in hot summer, without thorough watering. In order to maintain the normal growth of plants, too much summer water is perishable. When the temperature is lower than 5 degrees in winter, the water should be cut off gradually, and the basin soil should be kept dry below 3 degrees, and try to keep it not lower than MINUS 3 degrees.
5, fertilization: less fertilization, generally choose the diluted cactus liquid fertilizer on the market, pay attention to the fat water does not touch the fleshy leaves.
How to raise Hu pilan? What are the breeding methods and precautions of Hu Pilan?
Huperzia serrata is a perennial evergreen herb. Many friends like to keep potted Huperzia serrata at home, not only because it has ornamental value, but also because it can absorb harmful substances such as formaldehyde in the house and reduce the harm to their families. Hu Pilan's posture is resolute, strange and interesting. It is a common potted foliage plant at home, suitable for decorating study, living room, bedroom and other places, and can be viewed for a long time. Let's take a look at the indoor cultivation methods and precautions of Populus euphratica!
Introduction to the Growth Habits of 1 Hupilan
Huwei orchid leaves are firm and upright, with gray and dark green huwei orchid-like stripes on the leaves. Its posture is firm, peculiar and interesting, with many varieties, great changes in plant shape and leaf color, exquisite and unique, strong adaptability to the environment, warm and humid, drought-resistant, light-resistant and shade-resistant, and lax requirements for soil. Sandy loam with good drainage is better, and the growth temperature is 20 ~ 30℃.
2. Introduction of propagation methods of Picea crassifolia.
1. rameting: firstly, take the whole plant out of the pot, remove the old culture soil, expose the rhizome and cut it into several plants along its direction (so that each plant contains at least 2-3 leaves), and each pot can be planted with 2-3 plants. This method can raise seedlings all year round, but it is best in spring and summer, which can be combined with changing pots in spring.
2. Cutting: Cut the mature leaves into small pieces of about 8 cm, dry them in the shade for 65,438+0 ~ 2 days, and then insert them upright into clean river sand for 3 ~ 4 cm. Be careful not to insert them upside down when cutting. In summer, cuttings can grow adventitious roots for about a month, and then new buds will grow at the base. After the new buds grow leaves, they can be transplanted into flowerpots with cuttings. It takes a relatively long time for cuttings to take root in other seasons. As long as the temperature is 15 ~ 25℃, it can be cut at any time.
3. Introduce the cultivation methods and matters needing attention of Hupilan.
1, soil: the soil of Hupilan needs to be loose and breathable, so when mixing soil with Hupilan, you must pay attention to using 2/3 rotten leaves and 1/3 garden soil, and remember that the soil must be loose and breathable, otherwise it will cause water not to evaporate easily, leading to root rot.
2. Temperature: Hupilan has high requirements on temperature. The suitable growth temperature is 20 ~ 30℃, and the lowest in winter should not be lower than 10℃, which must be paid attention to, especially in the northern region.
3. Watering: Hupilan also has high requirements for water. Generally speaking, if the soil is loose, it needs to be watered twice a week, while in winter, it only needs to be watered once because of climate factors.
4. Pruning: compared with other green plants in China, Hupi orchid grows faster, so when the pot is full, it needs to be pruned manually, mainly to cut off the old leaves and places that are too prosperous to ensure its sunshine and growth space.
5, change pots: Hupilan is a perennial plant. Generally speaking, it should be changed every two years. When changing pots, we should pay attention to supplementing nutrients to the new soil to ensure its nutrient supply.
6. Fertilization: Hupilan doesn't need much fertilizer. Fertilization is only needed twice a month during the growing season. Pay attention to the application of dilute fertilizer solution to ensure vigorous growth.