1. Turn the black rubber pier left and right by hand to adjust the gap between the cover and the net.

2. Go to the repair shop (you don't need to use your own tools) and open the hood. There are three screws to fix the fender on the left and right sides, one at the tail of the headlight, one under the innermost sponge of the hood and one in the middle. Loosen these three screws and pull out the fender a little. Tighten the screws when the hood feels not wide.

3. The hydraulic rod is on the right. When closed, the left side is not closed tightly. After opening, press the left side hard. If the adjusting bolt is too high, put it down.