It depends on what mold you want to know. Please explain so that you can answer. Thank you. For stamping dies, the dies include: process parts and structural parts. Process parts include working parts (punch and die), positioning parts (side edge, stop pin, guide pin, guide plate, etc. ), pressing and discharging devices and other discharging devices. Structural parts include guiding parts (guide posts and guide sleeves), fixing parts (punch fixing plates), fasteners (screws and cylindrical pins), supporting parts (backing plates, upper and lower die holders, die handles), etc. For plastic molds, the mold consists of eight parts. 1. Molding parts: core, cavity plate, molding rod, side core, etc. 2. Gating system parts: sprue sleeve, sprue sleeve 3, guide parts: inclined guide pillar, small guide pillar 4, ejection parts: ejector pin, ejector plate, ejector tube 5, lateral parting and core-pulling mechanism: inclined wedge 6, fixing and supporting parts: upper and lower die holders, fixing plate, screw 7, positioning parts: positioning ring, positioning pin 8, heating and cooling parts.