Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - What glue is used to bond the skirting line of ceramic tile?
What glue is used to bond the skirting line of ceramic tile?
Generally, cement is used to stick off the skirting line of ceramic tiles, and marble glue can also be used.

Installation and construction method of tile skirting line:

(1) sticking method: according to the wall standard reinforcement and standard horizontal line, use 1: 2 ~ 2.5 cement mortar to wipe the bottom ash and scrape off the lines. After the bottom mortar is dry, paste the wet and dry tile skirting board with 2~3mm plain cement slurry, flatten it with a rubber hammer, and always pay attention to leveling and straightening with a level and ruler. The next day, wipe the seams with cement slurry of the same color as the floor.

(2) Grouting method: temporarily fix the skirting board in the installation position, and firmly fix two adjacent skirting boards and skirting boards with the ground and wall with gypsum, and then grout with 10~ 15cm cement mortar (volume ratio). And wipe the spilled mortar clean at any time. After the final setting of the cement mortar to be poured, the gypsum shall be scraped off and wiped clean, and the joints shall be wiped with cement slurry of the same color as the board surface.