1. Local hot bending

This acrylic mobile phone display stand is the result of local hot bending. The acrylic plate is hot-bent at right angles to make a smooth arc. It is the most commonly used method in the processing of acrylic products. Cut a piece of acrylic sheet, use a high-temperature mold rod to heat-melt the edge of the acrylic that needs to be hot-bent. When the temperature reaches 70-80 degrees, you can hot-bend it, and then use external force to bend it into a right angle. The smooth arc shape of the acrylic product is completed.

2. Overall hot bending

Generally, machine hot bending is used. The acrylic plate is stacked with the mold to be formed and put into the oven, and the position is aligned. , and then under manual supervision, the acrylic plate will gradually soften as the temperature increases, wait for a few minutes or seconds, and finally attach to the mold. This requires controlling the temperature of the oven and not rising too high.

Finally, take it out and cool it, and you will have an acrylic product of the desired shape