The use of nail stickers is a kind of nail ornament that is quite popular with young women in recent years. Nail sticking is the basic skill of nail art, and nail plate is the fastest nail art, which is also suitable for sticking at home. Let's take a look at the steps of using nail stickers.
How to use nail patch 1, nail trimming
First, put your hands in warm water for a few minutes to soften your nails and the skin around them. Use nail clippers to trim your nails into the shape you need, which can be some radians or flat nails. Remember to trim the burr with nail file.
Step 2 apply nail polish
After manicure, apply nail polish to your nails. Nail polish can protect nails from external invasion and lock nutrients in nails.
3, splicing decal patterns
Estimate the size of nails, choose your favorite flower pattern on nail decal paper, and cut off the decal paper with scissors to stick it on your nails. A small area of decals will stick more firmly. In the process of assembling and selecting nail decals, the nail polish on the nails has dried out.
Step 4 apply nail polish
Apply nail polish to your nails, which can be transparent or other colors you like, but the amount of nail polish must match the color of the nail decal you choose. How to apply nail polish requires you to practice more.
5, began to decal
Quickly put the previously assembled nail decal on the nail that has not been completely dried, and you can use the eyebrow clip that MM usually uses for eyebrow trimming. This step must be quick, otherwise the nail decal will not stick firmly after the nail polish dries. In addition to decals, you can also paste some small rhinestones.
6. After the pattern of the nail applique is pasted, brush a layer of transparent nail polish, and the action should be light, otherwise the pattern pasted before will be flowered.
Come on, wait until the nail polish dries. You can put your hands in cold water to speed up the drying of nail polish.
Phototherapy nail sticking step
1, if you want to make long nails, you need to put a nail paste, usually half a nail paste. Grind your nails where the patch is needed, squeeze the glue into the concave shell of half of the nail patch with nail glue, and then stick it on the polished nails (be careful to polish it according to the amount you need to stick on your nails, because it needs to be polished in the next step, so it doesn't need to be polished too much).
2. Use a grinding bar to polish the nail surface, and it is best to make fine lines. In this way, nails and phototherapy glue can be well combined. Don't feel bad because your nails are not polished. Phototherapy without polishing or with little polishing can only last for two or three days. Prepare for phototherapy, this polishing is too important. Pay attention to the edges of nails, and don't forget to polish them thoroughly. Brush off the polished nail dust with a broom, and don't touch the polished nail surface with your fingers.
3. Prepare the phototherapy machine. Generally brush adhesive, evenly brush a layer of adhesive. The phototherapy machine is usually timed at 120S. Dear friends, colloidal bonding generally requires baking 120S, and water-based bonding generally requires baking for 60S. Put the coated hand into a phototherapy machine for ultraviolet baking.
Next, we need to apply colored glue. Take colorful sequin glue as an example, and make it into a gradient form. You need to use a phototherapy pen and apply a proper amount of colored glue to the tip of your nails as wide and as long as you want. Note that if it is a gradual form, you need to paint more on the tip. The closer you get, the less you feel. After applying lusterless glue, it needs to be baked for 60 seconds. We just set it.
5. Then you need to apply transparent glue. If the color glue is gradual and the nail surface is uneven, it is necessary to smooth the whole nail with transparent glue. Need to bake 120S. Dear, remember, remember not to glue water on the edge of nails, or you will knock on the edge ~ ~ It is best to leave a gap of 0, 5MM with the meat on the edge. Leave some space, the seal is easy to use, I'll teach you a little trick. If it is unfair for a while, it can be like this. Brush a thin layer first, bake for 30S, then brush a thin layer, bake for 30S, brush again and bake again, which can be repeated many times. Hehe, I will always be satisfied, but it's a little troublesome.
6. Be patient. In this step, we need to use quick-drying water as a cleaning agent, because the ultraviolet light of the phototherapy machine can only cure the phototherapy glue but not dry the surface. Pour quick-drying water on absorbent cotton to wipe the nail surface. At this time, the nail surface will not stick, and then polish the uneven place with burrs and level it. Clean the polished dust brush with a brush.
7. Sealing coating. There are generally two kinds of seals, one is a wash-free seal, and the other is a seal that needs to be cleaned with quick-drying water. Brush the sealant evenly on the nail surface with a brush, and cover the transparent glue on the nail. Because there is a gap when applying transparent glue, the whole transparent glue can be covered inside to achieve real sealing. Just remember, don't apply sealant directly to the meat on the outer edge, it will knock on the edge. After painting, put it in a phototherapy machine and bake it 120s- 180s. Take it out and wipe it with cleaning agent. You don't need to wash it once, but be careful not to take it out. Just touch it with your fingers and air dry it naturally for more than 3 minutes.
Steps for using nail patch 2 1. First, choose the right nail patch. If the radian or length of finger edge is not suitable, use 180 degree grinding rod to modify it. (If the epidermis on the edge of the finger is too long, you can first push the epidermis back slightly with a push rod. )
2. Gently polish the surface of the real nail with a 180 degree grinding bar to increase the adhesion. (If you are worried about nail damage or thin nails, it is recommended not to polish real nails. You can wipe the base oil first, but the relative adhesion will be worse. )
3. Apply a proper amount of special glue to the inner side of the artistic painting nail plate. Please avoid contact with skin. If you accidentally touch it, please soak it in warm water immediately and then wipe it with nail remover.
4. First, gently press the nail plate against the edge of the finger, then press the painted nail plate down against the surface of the real nail plate and gently press it to squeeze out the air between the gaps.
Remove the nail plate
1. Cut the nail plate short with acrylic scissors.
2. Soak nail polish remover or wet nail polish remover with absorbent cotton and wrap it with aluminum foil, and wait for about 15-20 minutes. (Before nail removal, apply vaseline or finger edge oil around the finger edge to reduce dry skin damage. )
3. After the nail plate is softened, gently push it out with the help of a push rod.
4. Remember to apply finger oil to repair after taking it off.
5. If you feel allergic or uncomfortable during use, please stop using it immediately.
Sticking method of nail slice
1, select the nail plate with the same size as the nail (if there are different sizes, select the most similar one and trim it).
2. Soak your hands in warm water, apply softening solution to the place where dead skin is produced on the edge of your fingers, push the dead skin up with a dead skin push, and cut it off with a special dead skin scissors.
3. Grind nails with a file to roughen the nail surface.
4. Apply glue to the manicured nail plate and push it with your fingertips (this will make the nail plate and nail closely fit).
5. Cut it to the length you think is suitable, and start polishing the half-pasted place, mainly trimming the thickness. Don't look with the naked eye after pruning, but feel with your fingers. It feels flat, just trimmed, and then the shape of the nail plate is trimmed. If possible, I suggest that you trim the shape of your nails after putting on the nail plate, and then put on the crystal nail polish, which is the place where you don't need to polish it. This is more convenient. ).
Steps to use nail patch 3 1. Wash your hands before manicure, and then apply a proper amount of hand cream to fully nourish your hands. Then clean up the barbs, dry skin and dead skin on your fingers.
2. Then grind the nails shorter and smoother, which is also beneficial to the use of nail stickers.
3. Prepare your favorite nail chips for later use.
4. Apply an appropriate amount of glue to the nail stickers. Glue must be used exclusively for nail stickers, and the amount of glue applied should not be too much or too little.
5. Then stick your nails on your fingers in turn and dry them with a baking lamp in turn. Almost every finger will be irradiated for about a minute.
6. When choosing a nail plate, it is best to choose the one that suits your nails and choose the length you like. Don't wait until it is glued, which will affect the beauty of your nails and some will damage your nails.
Whether it is nail paste or manicure, it has certain harm. Don't operate it for a long time. Regular manicure can make nails beautiful and make hands longer, but long-term manicure will make nails more fragile and affect nail growth.
How to use nail paste
Ordinary nail plates are made of molded artificial nails, and the specific treatment methods are full paste and half paste, and half paste is a little more complicated than full paste. Ordinary nail stickers are easy to fall off because of the mismatch between nails and nail plates.
Extending the nail is to use the nail extension paper clip and the extension glue, only to make the extension part of the nail, and then use the phototherapy machine to shape it, so as to achieve the visual effect of extending the nail. Extended armor can be used for a longer time without external force.
Generally speaking, extension nails are better than ordinary nail plates. Extension nails generally have a large space for manicurists to play freely, while ordinary nail plates are basically fixed, so they can only be generally beautiful.