Most traditional techniques can be used to punch stainless steel, but don't forget that the force required to punch stainless steel is 60% greater than that required to punch low carbon steel. Obviously, the frame of the punch should be able to withstand such a large force. It is also very important to solve the scratches, especially those caused by high friction and high temperature when stamping stainless steel. Common soaps or emulsions are not effective. Water-based stamping lubricant is a kind of composition, which combines the advantages of various lubricating components, thus eliminating the shortcomings of traditional lubricating products. IRMCO lubricant is a professional stamping lubricant. Aimeike has different series of products for different stamping processes. It is mainly used for punch stretching, punching, punching, bending and other processes in the process of workpiece forming, and can complete the most difficult drawing punch stretching. In metal forming-die, a very thin layer of Aimeco water-based stamping lubricant can protect the die, so the amount of lubricant will be reduced by more than 50%, avoiding the waste caused by excessive use and solving the cleaning problem of the workshop. In the stamping process, the mold will generate heat due to friction, and this high-performance lubricant will automatically stick to the heated key parts to protect the mold and reduce the downtime of mold polishing by an average of 25%. Welding-assembly, parts with no oil stain on the surface are easy to weld and assemble. The research and practice show that the application of Aimeike metal inert gas shielded welding, tungsten gas shielded welding and resistance welding has good results.