Backlit keyboards must be set by the Lamp Manager (KLM). If the KLM program is not installed, you can find the KLM installer on the installation CD provided by the product. Or download it from the following address.

MSI . com/service/download/utility- 16792 . html

The KLM program interface is as shown in the figure.

1. KLM startup symbol

2. Standard: two-color and two-color mode.

Breathing type/wave mode/breathing mode/

Game mode/normal mode

3. Idle: Wave wave Mode/

Breathing Breathing Mode/Off Off

4.LED area -a

5.LED color–a

6.LED switch–a

7.LED area -b

8.LED color–b

9.LED switch–b

10.LED area–c

1 1.LED color–c

12.LED switch–c

13. Color wheel

14. Keyboard lock key

15. Leave

First, start the keyboard LED light management program.

After installing the KLM application, the KLM startup symbol will appear in the toolbar in the lower right corner of the component and screen. Click this symbol to start the keyboard LED light management program and open the KLM setting interface.

Secondly, set the LED flashing mode to the standard state.

Set the required LED flashing mode in the standard state, which will be implemented during the system operation.

Three, click on the [standard] (standard state), and then in the two-color (two-color mode), wave (wave mode),

In the options of breathing, game and normal, set the flashing mode.

Set LED flashing mode in idle stop state.

Set the required LED flashing mode in idle stop state, which will be performed when the system sleeps.

4. Click [Idle], and then set the blinking mode in the wave mode, breathing mode and off options.

5. Set the color of the flash LED.

The flashing LED lights arranged under the keyboard are divided into three areas, and users can freely choose the color of the flashing LED lights in each area.

1. First, select the LED flashing mode in standard or idle mode. Please refer to the previous steps.

2. Select an LED area A/ B/ C with the mouse.

3. Click the mouse on any color on the color wheel to select the color of the LED light.

4. The LED lights in each area can be turned off separately. To turn it off, click the mouse on the LED switch in the LED area A/ B/ C, temporarily turn off the LED lights in this area, and then press it again to turn it on again.

Six, adjust the brightness of the flash LED lamp

When the LED flashing mode is set to Gaming (game mode) or Normal (normal mode), the brightness of the flashing LED lamp can be adjusted freely.

1. Select the game (game mode) or normal (normal mode) in the standard state.

2. Use the following keyboard keys to adjust the brightness of the LED lamp. LED lights divided into three areas can also be combined into one main area. Once three LED lamp areas are combined into a main area, only one LED lamp color can be selected when the flashing LED lamp is lit.

3. Click the [lock keyboard] symbol to combine three LED light areas into a main area.

4. Click the mouse on any color on the color wheel to select the color of the LED light.

5. To turn off the LED light, just click the mouse on the LED switch, temporarily turn off the LED light in this area, and then press it again to turn it on.

7. Close the setting interface of KLM.

To close the KLM configuration interface, please click [Close].